Replacement Hubs/Wheel Studs/Bearings Races for Triton Triton XT14-101-1 Trailer
Updated 02/25/2021 | Published 02/21/2021
Products Featured in This Question
Question:
Hi, Im trying to find parts for a trailer wheels studs or possibly complete hub assembly. Im not sure how to find the right parts. The trailer info is Triton XT14-101-1 Date 03/06 Vin 4TCSS114X6H224173 GVWR 2995# GAWR 2200# Tire 20.5 x 10E Rim 10 x 6.00 The axle has Dexter and the numbers 69-47 stamped on the end. Thanks!
asked by: Drew M
Expert Reply:
In order to spec the correct replacement wheel studs, I'd need the dimensions from one of your existing wheel studs, as shown in the provided diagram.
I spoke with the nice folks at Triton Trailers to find the specifics about your existing hubs. For a replacement hub, I'd recommend part # 8-259-50UC1 which is compatible with a 2200 lb axle. The hub has a galvanized finish to resist corrosion, and includes the inner and outer L44649 wheel bearing, and has the L44610 races pre-installed. The grease seal, dust caps and lug nuts are included.
(click to enlarge)
Product Page this Question was Asked From
Replacement Trailer Hub Wheel Stud, Drive-In, 1/2" x 2-3/4" - Qty 4
- Accessories and Parts
- Boat Trailer Wheels
- Trailer Hubs and Drums
- Trailer Tires and Wheels
- Wheel Studs
- 1/2 Inch Diameter
- Drive-In Stud
- 2-3/4 Inch Long
- Redline
more information >
Continue Researching
- Search Results: 205x8x10
- Search Results: 5 on 4~1/2 inch trailer hubs and drums
- Search Results: triton trailer hubs
- Shop: EZ Lube Grease Caps with 1.99" OD - Fits 7" and 10" x 1-1/4" Dexter Hubs - Qty 2
- Shop: Kenda 215/60-8 Bias Trailer Tire with 8" White Wheel - 5 on 4-1/2 - Load Range D
- Video: Review of etrailer Trailer Hubs and Drums - Pre Greased Idler Hub - AKIHUB-545-2-EZ-2K
- Video: Titan Trailer Hubs and Drums - Hub - T4084600042 Review
- Q&A: Replacement Hub for Triton Trailer Model Elite 22-101
- Q&A: Correct Replacement Idler Hub for Triton 2 Place Snowmobile Trailer
- Q&A: Replacement Hub for Triton Snowmobile Trailer
- Shop: Dexter's E-Z Lube Grease Cap and Plug Kit - 2.45" Outer Diameter
- Shop: DeeMaxx Stainless Steel Drive-In Grease Cap w/ Plug - 2.45" Outer Diameter
- Shop: Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: Trailer Hub Assembly - 2,200-lb E-Z Lube Axle - 5 on 4-1/2 - 13" - 15" Wheels - Galvanized
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Video: The Low-Down on the etrailer Trailer Coupler Lock for Flat Lip 1-7/8" and 2" Ball Couplers
- Video: All About the etrailer Trailer Coupler Lock
- Video: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector-118804 Feature Review
- Search Results: 3/4 marker lights
- Search Results: trailer lock
- Video: Review of the Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Video: Trailer Idler Hub Assembly for 2,000-lb Axles Spec Review
- Q&A: How to Find the Correct Bearings for a Triton LTWCI Trailer
- Q&A: Should Bearing Buddies Buddies be Used on EZ Lube Trailer Axles
- Q&A: Replacement Bearing Kit With Bearing Buddy Bearing Protectors To Replace Triton 07994-P Kit
- Q&A: Looking For Replacement Hubs, Wheels And Tires For Mastercraft Boat Trailer
- Article: Which Hitches are Made in the USA
- Article: Trailer Tire Sizing
- Article: How to Bleed Your Trailer Surge Brakes
- Article: How to Measure Your Trailer Wheel Bolt Pattern
on Accessories and Parts
