RV Door Striker Plate that is 3-7/8 inch Long by 1-1/4 inch Wide

Question

Question:

What is the part number for the one you found that is slightly longer and a bit narrower?

asked by: Mandyh M

0

Expert Reply:

I wish we had something that was close to what you need but I checked and we only really have options that are slightly longer and a little narrower.

expert reply by: Jameson C

0

plate dimensions
(click to enlarge)

Mandyh M.

2/10/2021

What is the part number for the one you found that is slightly longer and a bit narrower?

Jameson C.

2/10/2021

We have the part # 295-000022 which is 3-7/8" long x 1-1/4" wide.

Answer 1

Hello Ruben, thanks for reaching out. In regards to the Global Link RV Entry Door Locking Latch #295-000019, the striker plate screws are: 8-32 x 3/8" flat Phillips machine screw. The mounting screws for the lock are: 8-32 x 7/8" oval,…

view full answer...

Answer 2

Hey Jacob! The Bauer #BA29VR strike plate has not been tested with the RVLock compact lock so I can’t guarantee fitment. However, I can provide you with the dimensions and you can compare them to your existing strike plate: Overall dimensions:…

view full answer...

Answer 3

My recommendation is to go with the Global Link RV Baggage Door Slam Latch, #295-000015. This and the Bauer Products RV Baggage Door Slam Latch, #BA57FR each have a keyed alike option though the Lippert Standard Baggage Door Latch Kit, #LC317649 in…

view full answer...

Answer 4

The Global Link Replacement Strike Plate for RV Entry Doors - Steel #295-000022 and Global Link Replacement Edge Plate for RV Entry Doors - Steel #295-000023 do not come with mounting hardware. I've linked a photo and a video to help with…

view full answer...

Answer 5

To prevent theft of your Portable Power Watchdog Surge Protector with Bluetooth #HU97FR you can run the Master Lock Python Cable Lock #8419DPF through the metal holder on the cable (pictured below) and around the power pedestal.

view full answer...

Answer 6

I do have a couple of options for you that are pretty universal and work with most trailers. However, since there isn't a way to cross reference your specific trailer year, make and model, you'll need to take a couple quick measurements to…

view full answer...

Answer 7

A 205/75-14 tire is approximately 26.3 inches tall so for a cover I'd recommend the Adco Ultra Tyre Gard part number #290-3953 which is the size for 27 to 29 inch diameter tires and wheels. These covers are easy to install, will fit well, and…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

RV Door Striker Plate that is 3-7/8 inch Long by 1-1/4 inch Wide

Product Page this Question was Asked From

Continue Researching