Will Replacement Strike Plate Work With RVLock Compact Lock

Question

Question:

Will this work with Branded RVLock Compact lock ?

asked by: Jacob S

0

Expert Reply:

Hey Jacob! The Bauer # BA29VR strike plate has not been tested with the RVLock compact lock so I can’t guarantee fitment. However, I can provide you with the dimensions and you can compare them to your existing strike plate:

Overall dimensions: 3-7/8" long x 1-1/8" wide
Hole Spacing: 3-5/16" center to center
Opening size: 2-1/16" tall x 11/16" wide

If your current strike plate matches those measurements, the # BA29VR should work fine with your lock.

expert reply by: Robin H

0

Strike Plate
(click to enlarge)

Gary L.

5/13/2026

This strike plate worked perfect on our 2018 Little Guy Max camper door.

Answer 1

I went out to our warehouse for you and measured the Replacement Strike Plate for Bauer Products RV Door Locks part #BA29VR as this was not information the manufacturer offered. The opening is 2-1/16" tall x 11/16" wide. I have attached a…

view full answer...

Answer 2

Hello Ruben, thanks for reaching out. In regards to the Global Link RV Entry Door Locking Latch #295-000019, the striker plate screws are: 8-32 x 3/8" flat Phillips machine screw. The mounting screws for the lock are: 8-32 x 7/8" oval,…

view full answer...

Answer 3

I wish we had something that was close to what you need but I checked and we only really have options that are slightly longer and a little narrower.

view full answer...

Answer 4

My recommendation is to go with the Global Link RV Baggage Door Slam Latch, #295-000015. This and the Bauer Products RV Baggage Door Slam Latch, #BA57FR each have a keyed alike option though the Lippert Standard Baggage Door Latch Kit, #LC317649 in…

view full answer...

Answer 5

To prevent theft of your Portable Power Watchdog Surge Protector with Bluetooth #HU97FR you can run the Master Lock Python Cable Lock #8419DPF through the metal holder on the cable (pictured below) and around the power pedestal.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Will Replacement Strike Plate Work With RVLock Compact Lock

Product Page this Question was Asked From

Continue Researching