Solution for Hose Extension To Pair With 4-in-1 Elbow For Sewer Macerator System

Updated 01/26/2021 | Published 01/22/2021

Products Featured in This Question

Replacement 4-in-1 Elbow Adapter for SewerSolution Macerator System

(43)

$27.67

SewerSolution Macerator System for RV Waste Tanks - Bayonet Fitting and 4-in-1 Adapter - 10'

(72)

$126.96

Extension Hose for SewerSolution Macerator System - 25' Long

(49)

$60.94

Question:

I have a 1 1/2 inch male outlet from my forest river popup trailer, this outlet come off the shower drain which is combined with the macerator outlet. So it will be draining both items. The existing setup uses a 1 1/2 inch female 90 deg adaper to a garder hose. the other end of the garden hose goes to a sewer adapter that fits in a dump station triple thread design. So the garden hose has to handle the gray / black macerated output. Seems to me to be too small. I found a 1 1/2inch female to 3/4 inch barb adapter on your web site. Also found the elbow adapter for the sewer solution. All I need now is a 15ft 3/4 inch flexible PVC tube to make up the new drain line and now I will have a more robust system. The 3/4 pvc will easlily go on the barb correct size but the sewer solution metal slip fitting is 0.8?? inches so maybe a little tight, I believe I can make it fit and then use hose clamps. Soooooooo, what do you think?

asked by: James B

Expert Reply:

I recommend looking at the Extension Hose for SewerSolution Macerator System - 25' Long # SS25 which would provide a much better solution that trying to piece something together like you've mentioned.This is designed to work with the Valterra Sewer Macerator System # SS01 but would work with the Replacement 4 in 1 Elbow # SS06 that you were looking at and provide a secure connection since it's designed to fit on that metal end.

expert reply by: Erik B