Arrives before Christmas 
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces the 4-in-1 sewer adapter for your SewerSolution macerator system (SS01). Fits 3" slip and 3", 3-1/2", and 4" threaded sewer inlets. 90-Degree elbow reduces stress on hose by preventing it from bending sharply.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello neighbors, Steven here with etrailer.com. Today we're looking at the replacement four-in-one elbow adapter for your Sewer Solution Macerator system. That's right folks, if you're not familiar, that system is part number SS01, that's what the whole kit looks like. You can get that separately here at etrailer.com. Again, part number SS01. That again is the Sewer Solution Macerator.
So folks, again, this is simply just the elbow replacement. It's gonna allow you to connect the hose to your dump station inlet. As you can see, it's got multiple sizes here to accommodate a three inch slip, three and a half inch and four inch threaded sewer inlets. The nice 90 degree elbow here is gonna reduce stress on the hose by preventing it from bending sharply. That does simply pop out and pop back in.
Very simple, very easy to use. Couple dimensions, outer diameter, the smallest slip here is two and three quarter inches wide; the largest is four and a quarter inch. The outer diameter on this metal inlet is seven eighth inches, while the inside diameter is three quarter inches. Again folks, just a simple replacement directly from the manufacturer. Again, one 4-in-1 elbow adapter for your Sewer Solution Macerator.
I'm Steven, thanks for watching. Have a great day.
Average Customer Rating: 4.7 out of 5 stars (36 Customer Reviews)
Replaces the 4-in-1 sewer adapter for your SewerSolution macerator system (SS01). Fits 3" slip and 3", 3-1/2", and 4" threaded sewer inlets. 90-Degree elbow reduces stress on hose by preventing it from bending sharply.
I have used my Sewer Solution for several years. Sure comes in handy when the sewer connection is 30 feet to the rear of the sewer bin and up hill. Nice to not have to milk the sewer out of my 3 inch sewer hose!! :) Works great for me. The only problem I have experienced with it is the anti-syphon valve leaks clean water out of the middle of the valve when the water is turned on to dispell the sewer out of the hose to the dump. The Sewer Solution people replaced it already twice and it is leaking again. It must be made in China. Other than that, the Sewer Solution is so much easier to set up and use!! Plus you don't touch any dirty parts using it. I cap and plug both ends of the hose before I roll it up and store in the bin. When I put it into action, I even enjoy my cup of coffee during the process!!
fit perfect. I have another order for a backup camera can you tell me if it has shipped I have not received anything
Like everything I buy from trailer is quality this hose and elbow for my mascerator is exactly what I saw on the site and is a perfect fit
Just what I needed for certain campgrounds. Just needed this part of the system, not one with an included hose. Perfect fit. Shipped fast. Good value.
Good quality and delivered on time. I needed something to work with my new Sprinter class B macerator set up and this works well.
The product was delivered within a couple days.
When installing adaptor I found the nipple was to small to adapt to my macerator hose, to resolve the problem i purchased a .25 pvc adapter from hardware store.
Unit works great.
Very great full that you carry this product. It is exactly what I needed.
etrailer obtained stock from Valterra sooner than others and shipped promptly.
Great product- but I had to tape up the pipe a bit to get a tighter fit for my macerator hose.
The adapter came as promised and it was just the part I was missing. The price was the best i could find.
Excellent buying experience, product and follow-up the best .
Perfect fit
Larry
10/19/2022
It was a perfect fit. Just what I needef
This adapter works real well, I would give it 5 stars, but I believe a street elbow would enhance even it so the pump would not work as hard as it needs to on heavier waste, but works great as is.
It did not fit but I added a non threaded union to make a tight connection. Cannot test until I get on my trip trying to make the dump!
I love not having to carry so much hose. It’s slower draining but much simpler.
etrailer is a great source for rv parts.
I thought the product was great,I thought shipping was alittle high price.You mailed it.
No surprises, product was as I expected. Good service, I will use as a source of products in the future.
Thanx for prompt shipping/delivery :-)
great
Worked perfect for me
Exact what was ordered.
On time, and perfect!
Do you have a question about this Accessories and Part?
Condition: Like New
Notes: May have damaged packaging or minor cosmetic blemishes.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
David
9/7/2019
It working as well as expected. Use it every time I dump my tanks. It fits tight in the receiver.