How to Install Reese 83660 Friction Sway Control Unit on Both Sides of Trailer

Updated 01/21/2021 | Published 01/20/2021

Products Featured in This Question

Weld-On Sway Control Tab

(37)

$13.44

Question:

How do I install one on each side of my trailer

asked by: Quint

Expert Reply:

You can certainly use the Reese # 83660 sway control kit on both sides of your trailer A-frame. There's a couple of ways to do this, but the most simple way would be to use your existing ball mount, and have a
# C45822 sway control tab welded on both sides of the ball mount. The tabs should be welded in place by a qualified welder as shown in the provided diagram.

Or, you could use the # RP26003 on the right side and have the # C45822 tab welded onto the left side.

As a third alternative, if you're already using weight distribution, most weight distribution hitch heads have a hole of both sides of the hitch head for mounting a friction sway control.

Once you have a tab on both sides of the ball mount, you can install the # 83660 sway control units as described in the linked instructions.

I've linked to some product videos for the parts mentioned above.

expert reply by: Mike L