Does Curt Trailer Hitch Receiver Fit 2021 Ram 1500

Question

Question:

looking at hitch p/n 41913. will it fit my 2021 dodge ram

asked by: Wayne H

0

Expert Reply:

Yes, the Curt Trailer Hitch Receiver # C15005 will fit your 2021 Ram 1500, so long as you have the factory-installed trailer hitch on your truck.

Just keep in mind the factory hitch will be removed and will be replaced with this hitch.

expert reply by: Kyle S

0

Answer 1

We've got exactly what you're looking for. The Draw-Tite Class IV hitch #41913 has a huge 15000 lb towing/1700 lb tongue weight capacity that would work perfectly for you. You'll likely need to lower or temporarily remove the spare tire…

view full answer...

Answer 2

We do indeed have a trailer hitch receiver that fits your 2021 Ram 1500 with the new body style. The hitch will fit whether or not you have the factory hitch (though if you have the factory hitch it would need to be removed), and is made by Curt: -…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 9

You're right, the mounting bracket is unique (in a good way) for the Curt TriFlex NEXT Trailer Brake Controller #C24VV. The bracket is smaller and all you do is put the included adhesive tape on the bracket and stick it wherever you like under…

view full answer...

Answer 10

Hey Jess, welcome back. The Timbren Rear Suspension Enhancement System item #TDR1500DS is the correct set for your 2025 Ram 1500 Rebel, however I don't recommend them at all. These are the lowest capacity option we have and they're rated for…

view full answer...

Answer 11

Hi Steven, Thanks for the purchase and we do have the right harness for your 2025 Ram 1500 and the Redarc Liberty Brake Controller #RED24FR. The correct plug-in harness is the following part: - Redarc Plug-and-Play Wiring Harness #331-TPH-020 You can…

view full answer...

Answer 12

Hi James! With your GVWR being 7,600 pounds, your loaded tongue weight should be around 760 pounds. With that said, I recommend going with the Weigh Safe True Tow Weight Distribution Hitch - 2" Shank - 6" Drop - 8.5K GTW, 850 lbs TW…

view full answer...

Does Curt Trailer Hitch Receiver Fit 2021 Ram 1500

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching