Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Old bulbs can dim or fail when you need them most. This oval red LED light gives you dependable brake, turn, and tail signals with six long-lasting diodes that draw very little power—only 0.161 amps for brake/turn and 0.007 amps for tail at 12V DC. The LEDs burn brighter, use less energy, and won’t wear out like filaments do, so you get a crisp, clear signal every time you hit the brakes or turn.
Water damage ruins a lot of lights, especially on trailers that see rain or boat ramps. This one is built to stay sealed tight. The polycarbonate housing and lens are waterproof, so the light can handle full submersion without fogging or shorting out. You can pull out of the water knowing your lights will still work on the way home.
Not every trailer is set up for flush lighting, and cutting new holes can be a pain. This light mounts flat against your trailer with its built-in flange—no cutout needed. It secures through mounting holes spaced 7" horizontally and 2-3/4" vertically (center to center). Just line it up, bolt it down, and wire it in with the included 3-wire pigtail: white for ground, black for running lights, red for stop/turn.
If you want to boost visibility even more, you can add the snap-on reflector trim ring (part # A78RXB, sold separately). It clicks right over the flange to give your tail light a finished look while adding reflector coverage that helps others see your trailer in low light.
The sealed design and rugged polycarbonate lens mean this light holds up in harsh use. And with a lifetime warranty on the LEDs, you can count on long service life without needing replacements or spare bulbs down the road.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
Ratings & Reviews
Great folks to work with, always quality products and quick turnaround
I hope they work. The old ones got water inside the housing.
Very easy to install and great price!
It works A+
Just what I needed...Thank you
This tail light was better than the original. Perfect fit and easy to reinstall. Recommended to others in campground.
Perfect fit.
This may be one of the easiest companies I have worked with. The customer service and promptness is top shelf. I am just an individual with small orders, and they were amazingly responsive and helpful. There site is loaded with helpful information and videos as well. I’m a fan!
With the matching chrome rings, these fit my 2009 Airstream perfectly and made it look new again! Airstream suppliers wanted $69.00, just for one tail light. I'm so glad I replaced them all. Thank you!
Exactly as described, delivered quickly and excellent follow up from customer service team. Well done.
Product fit perfectly and works as expected. Arrived on time and price was fair.
Quick service. Part as described. Good company. I recommend them
Ben
10/23/2025
No problems
Perfect match and fit.
Perfect fit.
Fair price, good quality, works as advertised, prompt delivery.
The larger base helped me cover existing holes that were from an older large oval style light. The extra length of the base of these lights combined with the chrome trim ring coved all signs anything else was ever there. The 6 led diodes on low are very chill and at first I was thinking it wouldn't put out adequate light but when brake was applied omg lots of light for 6 diodes. Before and after pictures help under below
The lens fell off of my last taillite. This one is sealed and cannot fall off.
Easy install, bright lights, have held up well over 1 year. Work great on my folding 4x8 trailer from harbor freight. Having the lights mounted in the back of the trailer is much better than hanging them off the sides where they constantly catch on things. Love the low profile design.
Matt
3/27/2025
Still working great! Would definitely consider for future projects and recommend to others.
Jerred H.
3/27/2025
Nice and bright! Easy installation.
Exact match to the old light
Great product if you have an odd ball trailer light set up like I do that requires a center mount position plug! Fast east purchase and fast shipping, great company to deal with!
This light was almost an exact match for the stock light that came on the camper. I bought 2 and replaced them both, and they seem to be a little bit brighter than the originals, which I am glad with.
I have not hooked it up to power, but I'm sure it will work. THe only disappointment I had was the light I removed had a rubber pad to help seal the screw holes and wire entry to the back of my trailer to keep moisture out. This light does not have that and it is not available from your company.
Bob
2/18/2026
Evidently just fine. I traded my camper in on a new one and it was just fine during the inspection.
Exact replacements for my old tail lights.Fit perfectly. They also solved the issue. Tho old tail lights were allowing the blinker current to back track through the clearance lights. One of tail lights had water in it and when it flashed the clearance lights flashed too.
Victoria H.
3/8/2025
So glad to hear these worked out perfectly for you and they look good too, Steve!
While I've not yet installed these they look like good replacements for the OEM lights. They are the correct style, size and the screw hole placement seems to be correct. My only reason for giving them an average rating is that they don't come with any gaskets. The original lights have a gasket between the back of the light and the wall of the camper. While the light unit itself is sealed the wires come through a hole in the camper wall and without a gasket the possibility of leaks is there. I will likely buy some gasket material from an auto parts store and make my own. No, I don't think the camper sealant will work as well as a rubber gasket.
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Mark
6/4/2025
Easy to install. Still working.