What is the Pin Diameter for Master Lock Trailer Hitch Receiver Lock, # 1479DAT

Question

Question:

What is the pin diamater of the 1479DAT?

asked by: Richard

0

Expert Reply:

The Master Lock Trailer Hitch Receiver Lock, # 1479DAT, has a pin diameter of 5/8 inches. On a 2 inch trailer hitch the pin hole is going to take a 5/8 inch diameter. On a 1-1/4 inch hitch it will use a 1/2 inch diameter pin. I have included a link to a video review of this lock for you.

expert reply by: Michael H

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 4

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 5

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 6

Hey Dave, thanks for reaching out. For hitch setups with limited space on either side like your Sequoia, the best option for a hitch lock is the following: - Master Lock Trailer Hitch Receiver Lock - Swivel Head Design - 2" Hitches #1479DAT This…

view full answer...

Answer 7

Hi Steve; are your brakes DeeMaxx? If they are, you can use the Replacement Guide Bolt and Sleeve Assembly for DeeMaxx 3,500-lb to 8,000-lb Disc Brakes #DE85FR. If you have something else let me know, most parts for disc brakes are brand specific but…

view full answer...

Answer 8

Even when stored in the somewhat controlled environment of a garage, tires are still subject to dry rot and flat spotting. Even if the tire tread has plenty of depth left and you can't see any cracking with the naked eye, the generally accepted…

view full answer...

Answer 9

Hello Harold, Looks like you already found the longest ones we have, the CE Smith Carpeted Bunk Boards for Boat Trailers - 7' Long - 1 Pair #CE27845. For some 10' boards, I would go to your local hardware store to get some 2"x4"…

view full answer...

Answer 10

Hey Jason! The etrailer #e69ZV and Curt hitch do share the same design. Our hitch has the same restrictions so you do not want to use it for that bike rack. Instead, you can use the TowSmart Trailer Hitch Receiver #TS48QR. This also has a higher…

view full answer...

Answer 11

We sure do Brady! The Light Kit item #e67RV is exactly what you'll need for the etrailer Hitch Cargo Carrier Cage Kit for 24x60 Hitch-Mounted Carriers item #e42MV. The Light Kit item #e67RV includes two 15-9/16" long x 1-5/16" tall x…

view full answer...

Answer 12

Hey Rock, we have a dealer locater that I linked on this page that can help you find one of our dealers in your area who you can order from us through but we only have the one physical location currently in Wentzville MO. Are you curious about the…

view full answer...

What is the Pin Diameter for Master Lock Trailer Hitch Receiver Lock, # 1479DAT

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching