Recommended Replacement 26-1/4" Slipper Spring
Updated 08/15/2023 | Published 08/14/2023 >
Products Featured in This Question
Question:
I have a 2000 galvanized Shorelander boat trailer, SR-V1724 frame. I need to replace the 5 leaf springs. The current springs have one eye and an open eye. With my tape measure it was around 26”. Do you have this available and if not, is it possible to switch to a two eye spring or even a 4 leaf spring with more weight capacity.
asked by: Keenan
Expert Reply:
Thanks for the picture! I have something close to your 26" slipper springs. It is possible to switch to a two eye leaf spring or even go down to a four leaf spring with a higher capacity. If you wanted to switch it up to a two eye leaf spring I would need to know the distance from the center of the two bolts. You can email me back that measurement if you decide to make the change.
The 26-1/4" Long 4-Leaf Slipper Spring w/ Open Eye End item # e33SR with a protective coating is the closest option I have available in a slipper spring. This a four leaf leaf spring with a 4,300 lbs capacity.
Continue Researching
- Search Results: slipper spring bushing
- Shop: etrailer Rust-Resistant 4-Leaf Slipper Spring for 4,300-lb Trailer Axles - 26-1/4" - Dacromet
- Search Results: equalizer
- Search Results: 5 leaf trailer leaf springs
- Search Results: double eye springs trailer leaf springs
- Search Results: trailer springs
- Search Results: slipper spring
- Search Results: slipper springs trailer leaf springs
- Q&A: Is It Normal For Open Eye Spring To Hit Frame Of Trailer When Loaded?
- Q&A: ShoreLand'r Boat Trailer Slipper End Leaf Spring Rubbing On Trailer Frame
- Shop: etrailer Rust-Resistant 4-Leaf Double Eye Spring for 4K Trailer Axles - 26" Long - Dacromet
- Shop: CE Smith U-Bolt Kit for Mounting 2" Square Trailer Axles - 4-1/2" Long U-Bolts - Zinc
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: etrailer Rust-Resistant 4-Leaf Double Eye Spring for 3.5K Trailer Axles - 25-1/4" - Dacromet
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: Dexter Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 38" Axle Spacing
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Video: Installation of the etrailer Trailer Axle 4-Leaf Double-Eye Spring on a Boat Trailer
- Video: The Low-Down on the Single-Axle Trailer Hanger Kit for Double-Eye Springs
- Q&A: How To Convert Trailer With Slipper Springs To Double Eye Springs
- Video: Nylon Bushing: The Breakdown
- Video: etrailer Rust-Resistant 4-Leaf Slipper Spring for 4,300-lb Trailer Axles Review
- Q&A: Federal Requirements for Clearance Light Placement on a Trailer
- Q&A: Recommended Disc Brakes for Shoreland'r Boat Trailer Used In Salt Water with 3,225 Lb Axles
- Q&A: Hub for E-Z Lube Spindle on Boat Trailer
- Q&A: Replacing Suspension Assembly On Tandem Axle Boat Trailer
- Video: etrailer Rust-Resistant 4-Leaf Double Eye Spring for 4K Trailer Axles Spec Review
- Video: Comprehensive Review: Spring-Eye Bolt with Locknut for Slipper Springs
- Video: Spring-Eye Bolt with Locknut for Slipper Springs: The Breakdown
- Shop: Gooseneck Hitch
