What is the Center Height for 4-Leaf Slipper Spring # e33SR

Question

Question:

I dont see a diagram for this spring on your website. Can you tell me the center height measurement for this spring? Thanks.

asked by: T O

0

Expert Reply:

I went to the warehouse and measured the Spring # e33SR Slipper Spring and I have the measurements posted in the picture.

From the ground to the top of the bolt it is 6-1/4 inches. From the ground to the top of the top leaf it is 6 inches and from the center of the hook area to the center of the eye it is 26-1/4 inches.

expert reply by: Lori W

0

click to enlarge

Answer 1

When picking out a leaf spring you really want to base it on the capacity of the axle and the length more so than the amount of leafs in the spring pack. If you can get me the axle capacity of your trailer and how long you need I can get you the best…

view full answer...

Answer 2

It sounds like you already have done the correct center of one eye to the center of the other eye measurement. If your measurement is slightly off, sometimes the leaf spring may still work as leaf springs do expand by as much as 3/4-inch over time.…

view full answer...

Answer 3

I can help you determine how to figure out the right replacement slipper springs, though I'm not 100% certain what you mean by "where can I find how much space or clearance is required." I think you are asking if there is a standard…

view full answer...

Answer 4

I have a replacement option for you, but the only slipper spring we offer that is 1-3/4" wide and is 26-1/4" long is the 4-Leaf Slipper Spring w/ Open Eye End for 4,300-lb Trailer Axles - 26-1/4" Long #e33SR. Since you mentioned that…

view full answer...

Answer 5

For a single axle slipper spring hanger kit to be used with the slipper spring part #e33SR you'd want to use the part #APS3SE.

view full answer...

Answer 6

Slipper Springs like #e33SR do not use a bolt and bushing for the open eye end of the spring. It connects directly to the hanger using a slipper spring hanger kit.

view full answer...

Answer 7

We have the 4-Leaf Spring C-Hook Spring, #e33SR, that measures 26-1/2 inches from center of the bolt eye to the edge of the C-hook. See attached picture diagram. Unfortunately, we do not have a spring with only 3 leafs in this style leaf spring.

view full answer...

Answer 8

For a 26-1/4 inch long slipper spring that is 1-3/4 inches wide we have a spring that is going to be way overkill with capacity as the part #e33SR. This has a 4,300 lb capacity. The best option would be the part #SP-177275 with you moving your…

view full answer...

Answer 9

It sounds like the 4-Leaf Slipper Spring w/ Open Eye End #e33SR could be what you are looking for. Over time leaf springs can stretch so this one being 1/4" shorter than your current leaf spring is most likely correct. This leaf spring is rated…

view full answer...

Answer 10

To switch to a Double Eye Spring #e48SR you would need to also change out your Rear Hanger #30-20 since you will be adding Shackles #K71-358-00. This is required since the rear hanger has to be 1-3/4" wide on the outer versus at least…

view full answer...

Answer 11

I believe you need the 4-Leaf Slipper Spring w/ Open Eye End for 4,300-lb Trailer Axles #e33SR which measures 26-1/4" from the center of the spring eye to the end of spring.

view full answer...

Answer 12

The best leaf spring for your application is the item #e27SR which matches the 26 inch length you need and has a 4,500 lb capacity. This would have just enough extra capacity that won't fail but also would still flex enough to cushion the ride…

view full answer...

What is the Center Height for 4-Leaf Slipper Spring # e33SR

Product Page this Question was Asked From

Continue Researching