Does the Open End Of The Slipper Spring Require a Bushing?
Updated 06/27/2021 | Published 06/25/2021
Question:
I just installed this on my single axle 1996 escort 4300 lb trailer I researched your product and bought it from you. My concern is the open end that faces the back just rests of the bolt itself? The hangers are welded on and only had the bolts in them! Yes the front side has the bushing in it. Is this correct on the install. And yes I installed all new u bolts and Shackle bolts!
asked by: Tom H
Helpful Expert Reply:
The 4-Leaf Slipper Spring # e33SR does not require a bushing on the rear bolt that retains the open end of the slipper spring. You are correct in the way that you have installed this on your 1996 Escort trailer.
Product Page this Question was Asked From
etrailer Rust-Resistant 4-Leaf Slipper Spring for 4,300-lb Trailer Axles - 26-1/4" - Dacromet
- Trailer Leaf Springs
- Slipper Springs
- 9/16 Inch Eye
- Nylon Bushings
- 4300 lbs
- 1-3/4 Inch Wide
- 4 Leaf
- 26-1/4 Inch Long
- Marine Grade
- etrailer
more information >
Continue Researching
- Shop: etrailer Rust-Resistant 4-Leaf Slipper Spring for 4,300-lb Trailer Axles - 26-1/4" - Dacromet
- Shop: 4-Leaf Slipper Spring w/ Open Eye End for 4,300-lb Trailer Axles - 26-1/4" Long
- Q&A: Should a Nylon Bushing Be Used With the Open Eye End Of Slipper Spring # e33SR
- Shop: Nylon Bushing - 9/16" Inner Diameter, 1.024" Outer Diameter - 1-3/4" Long
- Video: Hands-On with the CE Smith Trailer Suspension Shackle Straps
- Shop: CE Smith U-Bolt Kit for Mounting 2" Square Trailer Axles - 4-1/2" Long U-Bolts - Zinc
- Q&A: Do You Have The Replacement Open Eye Leaf Springs and Hardware For a 2001 Load Rite Boat Trailer
- Shop: Spring-Eye Bolt with Locknut for Slipper Springs - 3-1/2" Long
- Search Results: e33sr
- Q&A: Karavan Tandem Boat Trailer Slipper Spring Replacement, is Bushing On Hook End Required
- Shop: Gooseneck Hitch
- Search Results: 4 leaf slipper spring
- Q&A: Recommended Replacement 26-1/4" Slipper Spring
- Shop: 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-5/8" Long
- Video: Nylon Bushing: The Breakdown
- Q&A: Is Bushing Required on Open Eye End of Slipper Spring
- Q&A: Bolts Needed To Install Slipper Springs
- Q&A: Installation of Slipper Spring with Open Eye End
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Search Results: trailer leaf springs
- Search Results: leaf spring kit square axle
- Search Results: bunk brackets
- Search Results: galvanized shackle
- Search Results: leaf spring bushing
- Article: Stability Control for Heavy Duty Vehicles
- Shop: Exhaust
- Video: etrailer Rust-Resistant 4-Leaf Slipper Spring for 4,300-lb Trailer Axles Review
- Video: Let’s Check Out the 4-Leaf Slipper Spring w/ Open Eye End for 4,300-lb Trailer Axles
- Video: What to Know About the 4-Leaf Slipper Spring w/ Open Eye End for 4,300-lb Trailer Axles