When your old springs start to sag or bounce, your trailer loses its balance and comfort. This Dexter double-eye leaf spring restores proper ride height and steady handling with 1,875 lb of support per spring — giving you a total axle capacity of 3,750 lb when used in pairs. It keeps the load even and helps the trailer track straight down the road.
You want suspension parts that hold up mile after mile, not something that wears out fast. This spring is built from high-quality steel with a 5-leaf stack that delivers consistent performance and long-term durability. It handles the stress of heavy use and rough roads so your suspension stays tight and dependable.
The double-eye style connects solidly to your hangers and equalizers, keeping the spring action consistent and smooth. It’s designed to help reduce bounce and sway, so you get a more controlled and predictable tow whether your trailer is loaded or empty.
Replacing worn suspension parts should be simple. This spring measures 26" eye to eye and 1-3/4" wide, so it fits right into standard trailer suspension setups. Swap out both sides at once and you’ll bring back the balanced ride and proper wear pattern your setup needs.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody. Andy here with etrailer. Let's take a quick look together at this Dexter double eye leaf spring. Now this leaf spring is designed to keep your trailer riding level and stable, especially when you're hauling those heavier loads. This spring is rated for 1,875 pounds of capacity, and since springs are meant to be used in pairs when matched together, they're going to fit a standard 3,750 pound axle set up. Now getting my tape measure here, let me measure the length measuring center of eye to center of eye, and trying to line that up as best as I can.
It looks like we're sitting right at 26 inches on center. So that's important 'cause that length is gonna maintain your trailer's proper ride height and keep everything balanced while towing. The width of this spring is 1 3/4 inches. So this is built for a durable steel so it's made to handle regular road use and rougher terrain without wearing out quickly. The five leaf construction's going to give you strength and support, which is gonna help prevent sagging over time.
And because this uses a double eye design, this is going to give you smoother handling and reduced bouncing in your suspension, giving you a more controlled comfortable tow. If you happen to have any other questions, don't hesitate to reach out to us. We do wanna make sure that you're getting exactly what you need, but if you want help with installation on this product page, underneath the photo section, we have a link that will take you to our installer locator. If you click that link and answers the questions that it has for you, that locator will help you find an installer that etrailer has partnered with in your area to do the installation for you. Well, again, my name's Andy.
Thank you for joining me.
Ratings & Reviews
Products fit as expected
It was great working with Odelia. Was glad to find the 8000lb. leaf springs for my 2017 Solitude fifth wheel rv. The shipping was great and arrived in 2 days with 2 left springs per box. Can't wait to get installed.
This was a direct replacement for the spring that broke. It was relatively simple to install, as long as you have the jacks and tools needed.
Quality parts and quick shipping.
Easy installation. Fit perfectly.
My 3500lb leaf springs have failed for the second time so I upgraded to 4000lb springs, I had just upgraded my suspension with the CRE 3000 and wet bolt kit and along with the disc brake conversion I did last year so with the help from etrailer we are ready to put so more comfortable miles behind us. You can always count on the techs from etrailer to get you your parts and fix any mishaps that may come. Thanks etrailer.
Very nice looking leaf springs, although being a Dexter product I would have thought they were made in USA, a little disappointed they are not, I will be installing on my 20’ enclosed trailer
E-TRAILER ALWAYS HAS GOOD PRICE AND FAST DELIVERY.
Leaf springs arrived in a very timely fashion. They were exactly what I ordered and installing them went very smooth and they fit perfect.
My 15 year old springs on my Keystone fifth wheel we’re flat. These new springs raised it back to original height. The camper is now level with the truck again.
Perfect fit. Exact fit especially since the original manufacturer is out of business. Super help finding the replacement via chat. Thank you so much. Also they had it at my door in less than 72 hours. This is a picture of what was broken!
Springs are perfect and delivered quickly. The packaging did not fare well in shipment and shipper had taped the box back together the best they could. All parts are in fine shape with no damage.
Replaced some prematurely worn-out springs on our RV. Time will tell how they hold up, but they fit perfectly in my application. Replaced the included nylon bushings with brass bushings before install.
It appears I had a bad Dexter spring on my 2026 Sunlite 21TH. Didnt want to deal with Warranty stuff so purchased 4 new springs from etrailer.
Perfect replacement for stock springs on my Coachmen Clipper Popup camper
the ordering process was easy, the shipping was very quick and the installation was easy for the most part. I had to replace a broken spring on a tandem axle set up which had a equalizer which had rotated due to the trailing broken spring. I replaced the other side spring and it was a very easy. I have not used the 5th. wheel yet but don't see any problems. Thanks for the great service....
junk
bought for my 3500 pound single axle TT
1st trip already flat
Trailer weighed and under limits
I purchased my 5x8 tilting kit trailer in 1993. I added a stake bed and plywood deck and it served me well over the years. I discovered recently that the axle and springs had rusted severely. I planned to scrap the trailer and purchase another. After searching months for new or used and having no luck, I decided to look into replacing the axle and springs. I was able to find replacement with ETRAILER. I was nervous about ordering and worried that it would not fit but I went ahead anyway. My son and I replaced the axle and it fits perfectly. Thanks ETRAILER for helping to save my very useful tool!
Delivered to Guam and got to fully restored my boat trailer for a fraction of what could have cost me on island. Perfect choice
The service was terrific! My wife and I headset out on the road for a cross-country trip and after 400 miles I found I had a broken spring and it was Labor Day weekend also. You guys got that spring to me very quickly and I was able to get back on my way. By the way, I bought an extra one for the next time lol. Again thank you so much!
Installed 4 new springs, Moryde equalizer and wet bolt kit onto 17 Imagine 2800 BH camper. Total time was 5 hours including blocking up the camper and clean up.
No fitment issues. Ride height increased by 1 inch.
Quality Dexter springs.
I had purchased 4 of the DX23CR Springs to replace the OEM springs on my Grand Design Imagine XLS 22MLE. The springs were a direct replacement, however I have the MORyde CRE3000 with a wet bolt kit installed. When I removed the nylon bushing to install the bronze bushings for the wet bolts, the bronze bushings fell right thru the hole in the spring eyelets. Eyelets were to large.
I returned the 4 springs and Etrailer sent me out Four more, they had the same issue.
Etrailer was awesome as far as the returns were a breeze.
Still on search for a spring with the proper eyelet hole dimensions
This 8000# axle leaf spring is one of seven. Six of them on the trailer, and one as a spare. I upgraded from the 7000# leaf spring to the 8000# leaf spring. Keeps my 18,0000lb toyhauler from sagging. A great upgrade. Also might consider the upgrade on wet bolts and thicker shackles. You won't regret it.
These came quick. I haven't had a chance to pull it far down the road but it was a great replacement for the single leaf springs that tracker used on their trailers for the tahoe t16 boats. The shackle strap kit that I used with these worked great as well, however, there was slack in the bushing. It is supposed to be a 9/16" eye in the spring and the shackle kit was 9/16" as well. I went ahead and put it together so hopefully that doesn't come back on me to have to replace prematurely. I will know more later down the road.
We have a new micro-camper trailer, out of the factory weighing 600 pounds. I added 600 pounds of equipment, still well below the limits of the 2000 axle and 1000 pound (each) 3-leaf springs. However, after a little towing on rough highways, the springs were deforming and bottoming out on the frame. I swapped them out with these 4-leaf 1400 pound springs. Now all is good!
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.