Brake Controller Harness For 2008 GMC Sierra 2500HD

Question

Question:

Do you offer a plug and play harness that will work on a 2008 GMC Sierra 2500HD for the Primus IQ brake controller? Or do we need to do some cutting and splicing for this application. Thanks.

asked by: Rich

0

Expert Reply:

It is possible to get your Primus IQ working with your GMC Sierra. While there is not a factory port on your Sierra to plug a custom harness into, and there is therefore no custom harness available, you can still splice into the existing wiring under the dash. If your Sierra doesn't come with a factory 7-Way, then the product I'm recommending is the # PK11898 Pollak 7-Pole, RV-Style Trailer Connector Socket w/ Wiring Harness and Mounting Bracket. You'll find the factory wires you need for splicing this in behind the bumper of your truck. It will meet your needs and will pair very well with your Primus IQ.

expert reply by: Aaron A

0

Answer 1

You certainly can bypass the factory brake controller on your 2014 Chevy Silverado 3500. If you just unplugged the factory controller it will cause an error light to display on the dash. But it is easy to bypass the factory controller and not get…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 5

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 6

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 7

The only pin that should be continuously showing 12V power on the 7-Way connector on your vehicle is the 12V power circuit which is normally the black wire but not always. In 7-way wiring the 12V auxiliary power feed is carried on the contact at the…

view full answer...

Answer 8

Hey David, thanks for reaching out. Yes, the Curt Trailer Hitch Receiver #C82RJ will indeed fit the 2027 Kia Telluride. This hitch is still in the pre-order phase, but it is being going to fit both the 2026 and 2027 Telluride. Right now, we are…

view full answer...

Answer 9

Hey Bryan, congrats on your new SUV. As of (05/13/26) the Curt Hitch item #C82RJ and the Curt 4-Way connector item #C34MJ are the only parts we know of that are going to be coming out for the new 2027 Kia Tellurides. It's super early in the year…

view full answer...

Answer 10

Your brakes lights should be illuminating when the brake pedal is depressed when using the Roadmaster Brake-Lite Relay Kit for Towed Vehicles #RM-88400. When using the relay kit, your vehicle's lights should mimic those of your RV. I would check…

view full answer...

Answer 11

To install the Curt Echo Under Dash part #C27JR in your 2000 Chevy Silverado 1500 you'd need the install harness part #C51342 which plugs in under the dash. If you were wanting something a little more economically priced you'd want the Brake…

view full answer...

Answer 12

Hey Steven, I did head out to our warehouse and confirm the dimensions of the Bauer #BA28UR are as stated 5-1/4" tall x 4-1/2" wide. I did however locate one that is the size you need and the lock we recommend for replacing the BP12 that…

view full answer...

Brake Controller Harness For 2008 GMC Sierra 2500HD

Product Page this Question was Asked From

Continue Researching