Connecting Valterra Bladex Waste Valve to 3 Inch PVC Pipe

Question

Question:

Looking at Valterra T40A - need an air tight gate valve that can be ed in an existing 3 PVC Sch40 pipe - not sure what HUB and Spigot references - Simply want to glue this into and existing 3 pvc pipe

asked by: Ken

0

Expert Reply:

The inside diameter of each side of the Valterra Bladex Waste Valve # T40A is 3 inches with the outside diameter being 3-1/2 inches. This is the same as your 3 inch PVC pipe. You wouldn't be able to connect the PVC pipe directly to the valve, but could with connectors that have an inner diameter of 3-1/2 inches.

expert reply by: Victoria B

0

Answer 1

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 2

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 3

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 4

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 5

Hello Kevin, Thanks for writing in. The main difference between the Power Watchdog Surge Protectors #HU67FR and #HU42VR comes down to the monitoring capability, housing design, and surge protection rating. The #HU67FR is the newer Generation 2 model.…

view full answer...

Answer 6

Thanks for letting us help Richard. I'm assuming you're referring to the waste valve for your black tank. We will have a replacement option for you, but unfortunately, there are quite a few different waste valve styles and plumbing…

view full answer...

Answer 7

Schedule 40, 3 inch PVC pipe has an outer diameter of 3.5 inches and an inner diameter of 3 inches. The Valterra Bladex Waste Valve #T40B you referenced is designed to fit OVER a 3 inch diameter pipe so what you'd need is the spigot version to…

view full answer...

Answer 8

We have a wide selection of valves, many of which are the same as used by the OEM's. While I do not have the abilty to pull build sheets and the know the part number used by the OEM I am certain we can locate something that will work. If you are…

view full answer...

Answer 9

In order to determine the correct waste valve for your 2012 MVP Destiny 5th Wheel you will need to just figure out weather or not the valve you're replacing slid over your pipe or into your pipe. If your valve slid into your sewer pipe, then…

view full answer...

Answer 10

For your Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter - Lippert 1621 and 0719 - 20,000 lbs #RP94720 you will need the Air System Service Kit for Reese Goose Box 5th Wheel to Gooseneck Air Ride Coupler Adapter #RP86007 which will…

view full answer...

Answer 11

Hello Lee, thanks for reaching out. If air won't go in at all it could be a bad/clogged valve. You could also have a major leak somewhere. Have you tried a soap test to see if there are any leaks?

view full answer...

Answer 12

The difference between hubs and spigots in terms of RV waste valves like the part #T40A is that hubs fit over pipes and spigots fit into them instead. So it really comes down to if you have a preference but the #T40A is a spigot on both sides.

view full answer...

Connecting Valterra Bladex Waste Valve to 3 Inch PVC Pipe

Product Page this Question was Asked From

Continue Researching