Triton Trailer Spindle Size Hub is a Dexter 8-247

Question

Question:

What spindle is on a2012 triton enclosed 27 foot replacing hubs the hub #isDexter is a 8-247 now

asked by: Mark

0

Expert Reply:

The hub you have similar to the Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles part # 8-247-50UC3 uses the #84 spindle like the Square #84 Spindle for 3,500-lb Trailer Axles part # TRU47FR. It will use the Bearing Kit for #84 Spindle part # BK2-100. This includes everything you need to replace you bearings if that's what you're after.

I have linked a replacement video below for you to check out.

expert reply by: Randy B

0

Answer 1

Hello Steven, thanks for reaching out. Yes! The Air Lift LoadLifter 5000 Air Helper Springs #AL38FF will indeed fit your 2022 Ford Bronco with the Sasquatch package. All the hardware and brackets will bolt on without modifications. I also recommend…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Thanks for the information Kevin! To flat tow your 2025 Ford Bronco with a standard bumper and LED lights, I recommend the following parts: Tow Bar and Safety Chains - etrailer XHD Non-Binding Tow Bar for Roadmaster Direct-Connect item #e84ZR Base…

view full answer...

Answer 4

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 7

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

view full answer...

Answer 8

Hey there, I completely understand wanting to keep your new Bronco as clean and unmodified as possible while still getting a solid flat tow setup. For a 2025 Bronco with the capable bumper, the best confirmed base plate option is the Roadmaster…

view full answer...

Answer 9

Hey Mike, if you can fit a larger 12 inch wheel and tire like the part #AM35351DX which is a ST145R12 on a 4 lug wheel this will be your best option as it will have a higher speed rating than what you have now and will also have a higher weight…

view full answer...

Answer 10

Hey Sean, since we know the 2023 Ford Bronco Badlands has D-rings that are 1 inch thick and that you also have a Roadmaster tow bar the correct base plate kit solution is the Roadmaster part #RM65FR. For lighting you can use the diode kit, #RM-15267,…

view full answer...

Answer 11

Hey Justin, thanks for reaching out! I'm guessing by "SAS Package" you're referring to the Sasquatch Package. In that case yes, the Air Lift LoadLifter 5000 Air Helper Springs #AL38FF are compatible with your 2024 Ford Bronco Black…

view full answer...

Triton Trailer Spindle Size Hub is a Dexter 8-247

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching