What Are the Dimensions of the TruRyde #84 Spindle for 3,500-lb Trailer Axles
Updated 10/24/2020 | Published 10/21/2020
Products Featured in This Question
Question:
Could you provide the dimensions of spindle TRU24FR?
asked by: Mark
0
Expert Reply:
The #84 Spindle # TRU24FR is 8-1/4" long with a 2" diameter stub. This spindle will fit the following bearings and components, which are all sold separately:
Bearings-
Inner bearing: # L68149 (1.378" inner diameter)
Outer bearing: # L44649 (1.063" inner diameter)
Races-
Inner race: # L68111
Outer race: # L44610
Grease seal: # 58846
Inner diameter: 1.719"
Outer diameter: 2.565"
expert reply by:
Erik B
0
Product Page this Question was Asked From
#84 Spindle for 3,500-lb Trailer Axles - 2" Diameter
- Trailer Spindles
- Standard Spindle
- Without Flange
- L68149
- 2 Inch Diameter
- Round
- For 3500 lb Axle
- TruRyde
more information >
Continue Researching
- Search Results: kodiak oil bath hub kit
- Search Results: trailer brakes
- Search Results: kodiak trailer brakes
- Search Results: oil bath trailer hubs and drums
- Search Results: 10 x 1~1/2 inch drum trailer brakes
- Search Results: 10" brake drum
- Shop: Kodiak XL ProLube Kit for 3500-lb Axles
- Q&A: Replacement Cap for Dexter A-60/A-75 Actuator
- Search Results: spindle wear sleeve
- Video: Kodiak XL ProLube Kit for 3500-lb Axles Feature Review
- Shop: Dexter Hydraulic Trailer Brakes - Free-Backing - 10" - Left/Right - 3.5K
- Shop: Kodiak Disc Brakes - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet/KodaGuard - 3,500 lbs - Oil
- Shop: Kodiak XL ProLube Oil Bath Hub Body and Cap - 1.98"
- Shop: Radiator Fan
- Shop: Kodiak Disc Brakes - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs - Oil
- Video: Review of DeeMaxx Trailer Hubs and Drums - Galvanized Trailer Idler Hub 3500lb Axle - DE89NR
- Video: Hands-On with the Kodiak Disc Brakes
- Shop: Demco Hydraulic Trailer Brakes - Free Backing - Galvanized - Left/Right - 10" - 3.5K
- Video: Feature Breakdown: Demco Hydraulic Brake Kit
- Q&A: Can Regular Grease Trailer Hubs be Converted to Oil Bath Hubs
- Shop: Hydraulic Trailer Brake Kit - Uni-Servo - Free Backing - 10" - Left/Right Hand - 3,500 lbs
- Q&A: Recommended Hubs and Rotors for an EZ Loader Trailer
- Q&A: Do 10 Inch Kodiak Stainless Steel Disc Brakes Work With Oil Bath Hubs
- Q&A: Does All Grease Need to be Removed from Hub When Converting to Oil Bath
- Video: The Low-Down on the Kodiak Disc Brake Kit-K2HR35DKG
- Video: Hydraulic Trailer Brake Kit Review
- Video: Breaking Down the Kodiak XL ProLube Oil Bath Hub Body and Cap
- Q&A: Can DeeMaxx Disc Brake Kit Use Oil Bath Instead of Grease
- Q&A: Will The Kodiak Disc Brakes Kit # KOD49FR Fit In EZ Loader Trailer With 3,700LB Axle?
- Article: How to Measure Your Trailer Wheel Bolt Pattern