Using an Adapter on a 2 Hitch for a 1-1/4 Boone Outdoor Tailgate Table on a 2018 Ford Edge

Updated 09/30/2020 | Published 09/28/2020

Products Featured in This Question

Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches - 3-1/2" Span

(1774)

$43.19

Curt Trailer Hitch Receiver Adapter - 2" (Class III) to 1-1/4" - 4" Long

(244)

$38.51

Question:

Does Boone Outdoor Tailgate Table work with 2 inch trailer hitch? If not will an adaptor cause it be wobbly? other thoughts? Will it work for the car above re: using the trunk as our seats?

asked by: Patrick

Expert Reply:

You can indeed use a hitch adapter to pair a 1-1/4" accessory like the Boone Outdoor Tailgate Table, part # BH70114, with a 2" receiver. Using an adapter reduces your tongue weight by 50%, so remember that if you plan on towing heavier accessories with a 1-1/4" shank.

If you are worried about sway, then you need an adapter that has a shorter shank. I recommend the Curt Adapter, part # C45770. It only has 4" between the center of one hitch pin hole to the other. I've linked to a video review of this adapter for you to look at.

Keep in mind that even though the Tailgate Table comes with an anti-rattle pin, another one should be used for the hitch side as well. Using two anti-rattle hitch pins for the two hitch pin holes will significantly reduce sway and wobble. I recommend the Let's Go Aero Hitch Pin, part # 63232. This pin also comes with a lock as an added bonus.

expert reply by: Kef G