Weight Distribution System Recommendation for 2021 Coachman Freedom Express 192RBS

Updated 09/23/2020 | Published 09/22/2020

Products Featured in This Question

Curt Round Bar Weight Distribution System w/ Friction Sway Control - 10K GTW, 1K TW

(457)

$409.77

Curt Friction Sway Control for Weight Distribution Systems

(324)

$76.84

2" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 10,000

(3881)

$20.93

Curt MV Weight Distribution System - Round Bar - 8,000 lbs GTW, 800 lbs TW

(356)

$356.00

Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 8,000 lbs GTW, 800 lbs TW

(623)

$596.95

Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 10,000 lbs GTW, 1,000 lbs TW

(623)

$609.95

2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 20,000 lbs

(3881)

$36.21

Question:

Tow vehicle is 2013 Ford F-150 145” WB 3.55 axle ratio. Will be used with 2021 Coachman Freedom Express 192RBS Hitch weight 454 lbs Thanks in advance.

asked by: Al M

Expert Reply:

When choosing a weight distribution system, you'll do so based on the fully loaded and ready to tow tongue weight of the camper. The camper has a GVWR of 6000 lbs, so at most the loaded tongue weight would be 900 lbs, though it'll likely be less than that. A tongue weight scale like # e99044 is a quick and easy way to determine the fully loaded tongue weight, but there are other ways which are outlined in the help article I've linked for you.

The Curt # C17062 works for trailer tongue weights ranging from 800-1000 lbs, which might be rated too high. If your tongue weight is less than 800 lbs, I'd go with the lower rated # C17051. On this system, the sway unit is sold separately as part # 17200. The C17501 is rated for trailer tongue weights between 600-800 lbs, and would be a more likely fit.

The kits mentioned above don't include the trailer ball. For a 2 inch ball, use # A-90 or # C40008 for a 2-5/16 inch ball.

However, because campers like yours are more susceptible to wind and turbulence induced trailer sway, I'd definitely recommend going with a more effective sway control option. I'd recommend a system with a better sway control component like the Curt TruTrack. For a tongue weight of 800-1000 lbs, use # C17500 or if the tongue weight is less than 800, use # C17499 which is good for 500-800 lbs.

The kits mentioned above don't include the trailer ball. For a 2 inch ball, use # A-90 or # C40008 for a 2-5/16 inch ball.

I've linked to some helpful videos for you as well.