Stowed Length of ARK ORJW1SU Off Road Trailer Jack

Question

Question:

Our trailer has a pretty short bit of exposed tongue because of the utility box that sits on it. As you can see, about 13” exposed for a total of about 2 feet before you hit the hitch. I’m wondering if either the single or dual wheel Ark off road ratcheting swivel jacks would be able to be mounted in the upward stowed position parallel to the tongue.

asked by: Don L

0

Expert Reply:

The ARK # ORJW1SU Off-Road trailer jack will need about 21-3/4 inches of available space on the trailer tongue. I wasn't able to make out the dimensions on your tape measure in the photo, so I couldn't say judging by that if it'll fit. I've linked to a product demonstration video featirng the # ORJW1SU trailer jack.

expert reply by: Mike L

0

click to enlarge

Answer 1

I will start by saying the ARK Extreme Off-Road Ratcheting Trailer Jack w/ Wheel #ORJW1SU will fit frames that are 2" to 6" tall. The bolt hole measurements vary and I included a diagram with everything listed, but the overall dimensions of…

view full answer...

Answer 2

The collapsed height of the Extreme Off-Road Ratcheting Trailer Jack w/ Wheel #ORJW1SU is 28-5/8" from the base of the wheel to the top of the jack tube. The tallest measurement of the jack when fully extended is 31-15/16" from the center…

view full answer...

Answer 3

When fully retracted, or collapsed the jack is 28.58 inches tall, and 38.42 inches tall when extended as shown in the provided diagram. I've linked you to a product description video featuring the #ORJW1SU ARK Extreme Off-Road Ratcheting Trailer…

view full answer...

Answer 4

Per the manufacturer The Xtreme Off-Road Ratcheting Trailer Jack w/ Wheel - Sidewind #ORJW1SU has a clearance of roughly 61.55 mm or 2.4 inches. So it will work on your frame. The jack has a sturdy steel construction which is durable and built to…

view full answer...

Answer 5

I have attached a picture with the various dimensions for the Extreme Off-Road Swing-Up Trailer Jack w/ Dual Wheels #ORJW750D.

view full answer...

Answer 6

I have attached two diagrams below with the dimensions for the XO350 and XO750. Both of these use a bolt on installation so you really only need to know the height of your tongue to see if it is compatible. The #ORJW350D fits 2" to 6" tall…

view full answer...

Answer 7

I have included an image below with the measurements for the mounting plate on the Xtreme Off-Road Ratcheting Trailer Jack #ARK54FR. The hole to hole measurements are from center of hole to center of hole.

view full answer...

Answer 8

Thanks for sending in the pictures of your trailer. The Dutton-Lainson Pull Pin, Easy Swivel Trailer Jack, #DL22457, that you mentioned will fit a 2 inch by 2 inch frame but I think that I may have a better option for your trailer. Take a look at the…

view full answer...

Answer 9

Hi Dan, I get why you want to be sure on this before ordering since that ST5 coupler setup is a little different. From what I can see, your trailer will likely need a horizontal-style fit, but the Trailer Valet bracket on the Trailer Valet 5X Swivel…

view full answer...

Answer 10

Hey TC, the Ark Xtreme Off-Road Ratcheting Jack w/ 2 Wheels #ARK54FR would likely work well for that assuming the tongue weight is under the max weight limit of 1,100lbs. I did see a review saying it wasn't working too well on a fully loaded…

view full answer...

Answer 11

We have several jacks that fit most of the parameters you mentioned, but the challenge was finding one with a rubber tire. The ARK Extreme Off-Road Ratcheting Trailer Jack, part #ORJW1SU would absolutely check all the boxes. It's not an…

view full answer...

Answer 12

Hey Matt, since you have a slight grade I would instead recommend the Trailer Valet 5X part #STC-V211 over the #ORJW1SU. The #ORJW1SU requires releasing tension in the crank that turns the wheel every time you go to crank the wheel further so I would…

view full answer...

Stowed Length of ARK ORJW1SU Off Road Trailer Jack

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching