Battery Vent Cover Replacement for Lance 830 Camper

Question

Question:

I have a Lance 830 Camper and need to replace my battery vent cover. I am not sure if I need just the cover or the cover/vent. Can you tell by the picture? Thanks so much!

asked by: Jen

0

Expert Reply:

Thanks for the picture! Based on that you just need a replacement cover part # A10-3300 and you'd be set.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The Roadmaster End Link Kit #RM-590147-00 contains 2 end links which are 11" from center to center. These include polyurethane bushings and mount using the included 1/2" hardware.

view full answer...

Answer 2

I checked with Roadmaster and the Roadmaster End Link Kit for Roadmaster Rear Anti-Sway Bar for Motorhomes part #RM-590147-00 is correct for a 2003 Ford E-450 Emergency Vehicle (Without Auto-Chains). The length of the end links is 12-3/4".

view full answer...

Answer 3

The center of eye to center of eye measurement on The End Link Kit for Roadmaster Rear Anti-Sway Bar for Motorhomes #RM-590185-00 is 8-1/2 inches, the overall length is 10-1/4 inches. These end links let you install the Roadmaster Rear Anti-Sway Bar…

view full answer...

Answer 4

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 5

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

Hey Randy thanks for the information! Here are the parts you'll need to add a brake controller to your 2006 Dodge Ram 1500 with a factory 4-Way connector: Brake Controller and Custom Fit Wiring Harness - Curt TriFlex NEXT item #C43GV 7-Way…

view full answer...

Answer 8

Hey Lars, welcome back! I can indeed confirm that the Furrion Variable Speed Chill Cube air conditioner with a heat pump is indeed really happening. They are currently available for order (02/04/26) and will be shipped out towards the middle of next…

view full answer...

Answer 9

The Dometic RV Water Heater - Gas - Automatic Pilot - 12 Volt - 8,800 Btu - 6 Gal Tank Item AT96121 is the direct replacement for the GC6AA-10E. Unfortunately it is out of stock with no expected restock date. Instead I recommend the Furrion RV…

view full answer...

Answer 10

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Answer 11

That’s a great question Chadwick, and this is one of those situations where the change in technology really matters. The GE Appliances Low-Profile RV AC w/ Heat Pump part #GE26RR will replace your current ARC13AACBL2 setup, but it’s important to know…

view full answer...

Answer 12

Hey David, we have everything we need to flat tow your 2006 Dodge Ram 1500 4WD but the first thing you need is a base plate kit like the Blue Ox part #BX1988 which I like because in my experience the Blue Ox kits are just really well made and easier…

view full answer...

Battery Vent Cover Replacement for Lance 830 Camper

Product Page this Question was Asked From

Continue Researching