Redarc Tow Pro Liberty Brake Controller, Harness and Install Panel for 2020 Toyota Tacoma

Question

Question:

Thinking about the Liberty controller for my 2020 Tacoma. I see the 331-tpsl-007 panel for 2020 tacoma fits the Elite control knob. Does it also fit the Liberty knob? Seems like it should, kind of a dumb q but you never know. Thanks.

asked by: James B

1

Helpful Expert Reply:

The Redarc Tow Pro Liberty # RED24FR is a really great brake controller choice for your 2020 Toyota Tacoma. All you need to install it is the harness part # RED99FR. This is by far the best value brake controller out there as you get a proportional controller that only requires a very small knob that mounts on the dash instead of a much larger controller. This does work with the install panel part # 331-TPSI-007.

expert reply by: Jameson C

1

Answer 1

Hi Josh; these two kits have the same brake controller and wiring harness. The #RED72CR comes with the mounting panels while the #RED68CR does not. Redarc recently put together a kit specifically for the Tacoma that comes with the extra parts and…

view full answer...

Answer 2

The Mounting Panel for Redarc Tow-Pro #331-TPSI-007 will definitely be the correct part for your 2016 Toyota Tacoma. I included a picture of this installed that will quell any doubts as well. The picture does show one more function on the panel than…

view full answer...

Answer 3

Hey David! There's no difference other than the sale on the Redarc Tow-Pro Liberty Brake Controller w/ Custom Harness -item #RED72CR or item #RED68CR. Both of these include the Tow-Pro Liberty and the plug and play adapter you'll need for…

view full answer...

Answer 4

The correct wiring harness needed for connecting the Redarc Tow-Pro Elite Trailer Brake Controller, #RED44FR, to your 2020 Toyota Tacoma, is the Plug-and-Play Wiring Harness #RED99FR. I suggest then using the Mounting Panel for Redarc Tow-Pro Trailer…

view full answer...

Answer 5

The Redarc Tow-Pro Liberty Brake Controller #RED24FR you were looking at is a great choice for your 2021 Toyota Tacoma due to only the control knob being visible once installed which makes it look like a factory option. To install the #RED24FR in…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 9

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 10

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 11

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 12

Sure, I can help with that. I can see why the fitment notes are confusing. For a 2012 Toyota Tundra with the factory tow package and factory 7 way connector, you'll want a brake controller that plugs into the factory brake controller port under…

view full answer...

Redarc Tow Pro Liberty Brake Controller, Harness and Install Panel for 2020 Toyota Tacoma

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching