Will RockyMounts HighNoon FC Solo 1-Bike Rack Fit Class III Hitch of 2013 Ford Explorer

Question

Question:

I have a class III 3 2 inch hitch for a 2013 ford explorer will this rack fit? I see that is says it fits 1 inch hitches also do I need to order a specific one at checkout?

asked by: Dwight J

0

Expert Reply:

The RockyMounts HighNoon FC Solo # RKY87RR fits both the 1-1/4 inch and the 2 inch hitch size like what your 2013 Ford Explorer has so it would fit and work well. It comes with a sleeve adapter that fits onto the shank of the rack so that it fits the 2 inch hitch size like you have properly.

expert reply by: Jameson C

0

Answer 1

You should place your E-Bike as close to your 2017 Buick Encore as possible when using the Saris Freedom 2 Bike Platform Rack #SA4412B, which means on the inside of the rack. The reason for this is so the rack and your bike remain as stable as…

view full answer...

Answer 2

We have the perfect rack for carrying your e-bikes with fenders and step through frames! You will want the Thule Easy Fold XT part #TH903202. This rack will fit your 1-1/4 inch hitch, has frame clamps designed for your style of frame, is specifically…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

We have a solution for you either way but the Hollywood Racks Sport Rider SE Bike Rack #HLY84FR may or may not work with your particular step through bikes. There are different styles of step through bikes and depending on how low the step through…

view full answer...

Answer 11

Hey Adrian! The higher capacity for the B&W #BW47BR and Curt #C77MJ comes from the construction. The B&W hitch weighs 45 lbs and then the Curt and Trailer Mate #TMT54FR both weigh 32 lbs. The Trailer Mate does sit just a tad higher compared…

view full answer...

Answer 12

Hey Eric, yes the Kuat Piston Pro Bike Rack part #KU66ZR will fit the Curt hitch #C11681 that you have installed on your 2017 Honda Accord. This hitch was designed to fit the 1-1/4 inch hitch size like what you just installed so it would work great…

view full answer...