Weight of MaxxAir MaxxFan Mini Roof Vent

Question

Question:

How heavy is this vent? Thanks!

asked by: Tina

0

Expert Reply:

The MaxxAir MaxxFan Mini Roof Vent with 12V Fan # MA00-04401M weighs just 10 lbs.

I have added a link below to a video review for you to check out as well.

expert reply by: Kyle S

0

Answer 1

I went out and measured the outside to outside points on the flange for the MaxxAir MaxxFan, part #MA00-04401M, and it's 16-1/4 square. It does fit the standard 14 x 14 vent opening which is what you'll find on most trailers and it's for…

view full answer...

Answer 2

The max amperage draw of the MaxxAir MaxxFan Mini RV roof vent part #MA00-04401M that you referenced is 5 amps.

view full answer...

Answer 3

Yes, since the fan of the MaxxAir MaxxFan Mini Roof Vent w/ 12V Fan #MA00-04401M is 12 volt you could reverse the direction of the fan by reversing the polarity of the motor.

view full answer...

Answer 4

I do have an option for you but the MaxxAir MaxxFan Mini Roof Vent part #MA00-04401M does not have a remote option. In order to get a remote you'd need to upgrade the entire unit to the MaxxFan Deluxe Roof Vent part #MA00-06200K which has an…

view full answer...

Answer 5

Hey John, since you have a 5 lug 12 inch wheel currently and want to upgrade to a 13 inch wheel what you really only need to do is match the bolt pattern of what you have to the new wheel you are looking for. Most likely it's the very common 5 on…

view full answer...

Answer 6

Eight inch trailer tires max out at 65 miles per hour. They are so small that at speeds above that they would have so many revolutions that they would get excessively hot and fail. Also, there isn't an 85 mph speed rating for tires. It goes from…

view full answer...

Answer 7

Not knowing the exact dimensions of the cover you have I can't say for sure that it will or won't work. However, I can tell you the the vent cover that is designed to work with the mini maxx is 25" long x 18-1/8" wide x 10-1/4"…

view full answer...

Answer 8

The best roof vents we offer for your trailer are going to be the MaxxAir FanMate RV and Trailer Roof Vent Covers part #MA00-955002 for black, part #MA00-955003 for smoke, or part #MA00-955001 for white. The reason for this is because they have the…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 12

You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Weight of MaxxAir MaxxFan Mini Roof Vent

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching