2,000 lb Trailer Hub With L44643 Bearings and 1.25 Inch Grease Seal ID to Replace Dexter 8-91A

Updated 08/06/2020 | Published 08/05/2020

Products Featured in This Question

Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - Pre-Greased

(1133)

$45.79

Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased

(1550)

$47.93

Replacement Trailer Wheel Bearing - L44643 - Qty 1

(2230)

$6.49

Question:

8-91A hub assembly. have a broken hub the above part number, It is off of a power rake. It has a 1 inch bolt as axle. Could you verify the hub length from the face where 1/2 inch studs come out to the top of bearing hub as well as length through bore of hub. It has L44643 cones with 1.25 ID seal for sleeves to fit. Do you have hub available as well

asked by: Tim R

Expert Reply:

Thank you for that info on the bearings and grease seal inner diameter, and we do have exactly what you need for a replacement hub for your Dexter 8-91A. These hubs use inner and outer bearings # L44643 with a grease seal that has an inner diameter of 1.249" like you were needing; they are even pre-greased for your convenience and you can choose from standard or E-Z Lube options:

- Standard: Trailer Idler Hub Assembly for 2,000 lb Axles # AKIHUB-440-2-1K

- E-Z Lube:Trailer Idler Hub Assembly for 2,000 lb E-Z Lube Axles # AKIHUB-440-2-EZ-1K

I have added a link to a video review for you to check out as well.

expert reply by: Kyle S