2017 Honda Fit Tongue Weight Rating

Question

Question:

Im seeing 2 different tongue load capacities. Can you clarify which weight is the correct measure?

asked by: Mike

0

Expert Reply:

The EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - 2" # 306-X7273 is a confirmed fit for your 2017 Honda Fit. The hitch receiver has an independent tongue weight rating of 300 lbs so that number would be what to go from unless your vehicle would surpass the Gross Vehicle Weight Rating found on the label of the driver's doorjamb. On page 86 of the online owners manual it states this.

expert reply by: Jason S

0

click to enlarge

Answer 1

The Kuat NV 2.0 2 Bike Platform Rack, #NV22G, and the Kuat NV 2.0 Base 2-Bike Platform rack, #BA22B. are both very similar bike racks. Both racks can be expanded to a 4-bike rack, #NA22G add-on for the NV 2.0 and #BA02B for the NV 2.0 Base, and both…

view full answer...

Answer 2

I attached a picture that shows the CME-PCL-INS as well as a help article that covers this portion of trailer wiring installs as well. Overall it's not a difficult process but it does take some time routing it up to the front of the vehicle.…

view full answer...

Answer 3

There are some subtle difference between the Kuat Piston Pro Bike Rack for 2 Bikes #KU76ZR and the Kuat Piston Pro X Bike Rack for 2 Bikes #KU98VR. Overall the two racks are very similar, there are just some subtle differences/upgrades on the Piston…

view full answer...

Answer 4

I recommend the Curt Trailer Hitch Receiver #C11681 over item #C11496 for your 2017 Honda Accord Touring with the V6 engine. The round bar looks cleaner and helps to prevent any road salt or other chemicals from sitting on the flat steel like the…

view full answer...

Answer 5

Great questions! When choosing between the Draw-Tite Hitch 1-1/4" #24920 and the Curt Hitch - 1-1/4" #C11406 for your 2019 Honda Fit, the bumper clearance measurements we have are the result of our install team's specs when they install…

view full answer...

Answer 6

That does look pretty iffy in regards to traveling at high speeds on the interstate and there is one thing you can do that I recommend, and that's add a trailer hitch and load extender. You did not mention what year your Honda Fit was but since…

view full answer...

Answer 7

We have two hitches that are verified to fit your 2019 Honda Fit. One is the Curt #C11406, and the other the Draw-Tite #24920. They are very similar except the Curt model recommends using stabilizing straps. A strap provides extra support for your…

view full answer...

Answer 8

Yes, you can use a hitch adapter like this one from Brophy #HTAD which fits into a 1-1/4" hitch receiver and has a 2" receiver on the other end. If you want an adapter with a rise, there's also #HT5R which gives you a lift of 5 inches.…

view full answer...

Answer 9

For your 2020 Honda Fit, between the Curt and Draw-Tite trailer hitches I definitely recommend going with the Draw-Tite hitch: - Draw-Tite Sportframe Trailer Hitch Receiver #24920 The reason for that is because when we installed this hitch on a Honda…

view full answer...

Answer 10

Hi Dwight, The TowSmart Hitch Adapter #TS52FR weighs 6.25lbs, but using a hitch adapter would reduce the capacity of the hitch by 50% because you're now leveraging the weight further away. You could go with the Curt #C18145, which weighs 27.58lbs…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

2017 Honda Fit Tongue Weight Rating

Product Page this Question was Asked From

Continue Researching