Which Reese Weight Distribution System to Use with 4,000 lb Trailer

Question

Question:

As title says. Will this be to much and affect the ride and handling of my setup? 2018 Ford F150 XLT SPORT 4X4 2021 FOREST RIVER WOLF PUP 17JG - 4000lb Camper Trailer.

asked by: Barry

0

Expert Reply:

We have a great similar system that would work well for you but the part # RE44FR is rated too high for a 4,000 lb trailer. You'd have a very harsh ride quality with this due to the spring bars being rated for a much heavier trailer.

Instead you'd want the part # RP65509 which has a tongue weight range of 200 to 600 lbs.

expert reply by: Jameson C

0

Answer 1

I think you'll need to go up a level in weight rating for your 5,000 lb GVWR Airstream travel trailer. The reason being the Reese Pro Round Bar Weight Distribution #RE34FR is for loaded tongue weights between 200 lbs and 600 lbs. I assume the 520…

view full answer...

Answer 2

Yes, you can flip the shank in the weight distribution system #RE44FR upside down in order to get more of a rise. In this position the maximum rise is 8-1/2 inches measured from the top of the hitch receiver opening to the top of the ball platform on…

view full answer...

Answer 3

To determine if you need rise, you will measure from the inside top of the receiver on your vehicle and then from the ground to the bottom of the coupler on the trailer. This should be done on as level a surface as possible. The difference will tell…

view full answer...

Answer 4

Not to worry, the added weight of a weight distribution hitch such as the Reese Pro Round Bar Weight Distribution #RE44FR for your 4,500 lb Evergreen camper does NOT count as added towing weight or tongue weight. There is an issue though, in that the…

view full answer...

Answer 5

Using a high rise hitch ball is not a problem with a friction sway control unit like the part #17200 that you referenced. There wouldn't be any decreased performance or issues due to this.

view full answer...

Answer 6

The Reese #RE44FR is really to much for your trailer. It's more than double that of what your Travel Trailer will require. You want the weight distribution hitch to match your trailer weights, not your maximum towing weights of your truck. For…

view full answer...

Answer 7

If the unloaded tongue weight of your 2015 Evergreen Ascend trailer is around 300 pounds, I don't think the Reese Pro Round Bar Weight Distribution #RE44FR is going to be the best option for you. This will have a minimum tongue weight rating of…

view full answer...

Answer 8

To get the best performance out a weight distribution hitch you'll want to first know your trailer's fully loaded tongue weight. Once you're fully loaded you could use a tongue weight scale like the #e99044 to get an accurate number to…

view full answer...

Answer 9

I made a picture showing 3 important measurements on the Draw-Tite adjustable ball mount #7390. The distance from hitch pin hole center to ball hole center is 11-3/4 inches. If the extra 2 inches is needed in a ball mount then of course it would be…

view full answer...

Answer 10

In order to find a weight distribution hitch for your 2020 Forest River Wildwood you will need to know your tongue weight. Tongue weight is the most important factor when it comes to determining the correct system. Tongue weight is typically 10-15%…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Which Reese Weight Distribution System to Use with 4,000 lb Trailer

Continue Researching