What Direction Will the Replacement Ventline Fan Motor Shaft Rotate?

Question

Question:

Does this motor have a specific direction of shaft rotation or can it be wired to provide either clockwise or counter clockwise rotation? Thanks

asked by: Ron M

0

Expert Reply:

The Replacement 12V DC Motor for Ventline, Ventadome, and Vanair Fans # BVD0218-00 does not have a specific direction of shaft rotation. The wiring will dictate the direction of the motor. The Replacement Fan Blade for Ventline Ventadome Trailer Roof Vents # BVD0215-00 is designed so the motor will rotate the blade counter-clockwise and that is how it is wired from the factory. I've attached a video to assist.

expert reply by: Jason S

0

Answer 1

For your Ventline E-Z Ventadome Trailer Roof Vent #V3094-601-00, the correct replacement fan blade is the Replacement Fan Blade for Ventline E-Z Lift Ventadome Trailer Roof Vents #BVE0114-00.

view full answer...

Answer 2

Ventline produces most of the trailer/RV roof vents supplied as OEM parts so our replacement parts selection should have you covered. If you can find a Ventline part number on your vent base this will help confirm which parts you need in case those…

view full answer...

Answer 3

We can confirm for you that the part #BVE0114-00 that you referenced has a 5 inch diameter like you are in need of.

view full answer...

Answer 4

I am impressed with all of the information you gave me. We don't always get such thorough questions. But to answer your question, yes, the part #BVD0215-00 would be the correct replacement fan for your RV vent. Had you needed the motor as well…

view full answer...

Answer 5

Yes. If you've got a Ventline E-Z Lift Ventadome Trailer Roof Vent w/ 12V Fan - Manual Lift - Smoke - Canada Approved #V3094-603-00C, which is the same as the V3094 you mentioned, then the Replacement 12V DC Motor for Ventline, Ventadome, and…

view full answer...

Answer 6

The Replacement 12V DC Motor for Ventline, Ventadome, and Vanair Fans part #BVD0218-00 works with a few different fan blades. If you have a Ventline Ventadome Roof Vent then the correct replacement should be the Replacement Fan Blade for Ventline…

view full answer...

Answer 7

There isn't an add-on fan kit available for your Ventline E-Z Lift Ventadome Trailer Roof Vent #V3092-601-00, but you could still get the motor and fan blade from their 12v models and try to attach it to the support for the lift arm. The motor…

view full answer...

Answer 8

For your Ventline E-Z Lift Ventadome Trailer Roof Vent w/ 12V Fan #V3094-603-00C, the correct replacement motor is going to be the: -Replacement 12V DC Motor for Ventline, Ventadome, and Vanair Fans #BVD0218-00.

view full answer...

Answer 9

Motor #BVD0218-00 should be the correct replacement. The motor comes with new wires, a bracket, and hardware. The screws that hold the motor to its bracket can be accessed by removing the fan blade. It should just pull off of the motor shaft. You…

view full answer...

Answer 10

You may be able to add a fan to your Ventline roof vent without removing it but it all depends on what part number you have. I spoke with my contact at Ventline who said that the VD0433 number you gave me is only for the screen on the vent. If you…

view full answer...

Answer 11

Hey Ed, the Ventadome part #V3094-601-00 would work for you as a replacement vent but there isn't a way to just replace the inner portion of the vent as the frame is all one piece. So you would have to replace the entire vent assembly.

view full answer...

Answer 12

I have some bad news for you Alex. The reason you are having trouble finding an upgrade for your Ventline E-Z Lift Ventadome Trailer Roof Vent #V3092-601-00 is because none exist. This is because the fan and all the bracing are mounted to the top…

view full answer...

What Direction Will the Replacement Ventline Fan Motor Shaft Rotate?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching