bing tracking image

Ventline Ventadome Replacement Fan Blade Review

content loading

Customers compare BVD0215-00 to these similar products

Products Featured in this Video

Review of the Ventline Ventadome Replacement Fan Blade

Today we're going to take a look at the Replacement Fan Blade for Ventline Ventadome Trailer Roof Vents, part #BVD0215-00. This replacement fan right here, see it's a pressed in assembly. Requires no tools to install. It just installs on the motor shaft on you electric motor and the fan. All right, now this is an all one piece unit that's designed to work with part #'s V2904 and part #V2119, on more newer models it will work with that part number. Now this is an all plastic assemble, pretty simple. Let's go ahead and show you how to replace it.

You're going to get access to the fan. It's going to be behind the screen here. You may or may not have to remove the knob here, I like to remove it just to get it out of the way. The screen just clips into place so push in these little tabs here to make it a little easier to remove. You want to be careful with the older models, they'll tend to dry off and be brittle.

We have a blade right here. It's just a friction fit. You just want to get a hold of it and pull straight up on it. Show you a little cheat. Use a trim panel tool, it's got this little hook here. You can use that to help work it off as well.

Take our new one and just basically press it on to the motor shaft, all the way down until it stops. All right, let's apply some power to it and see how it works. Works good. All right, now finished for part #BVD0215-00, the Replacement Fan Blade for Ventline Ventadome Trailer Roof Vents.

Info for this part was:

Employee Joe V
Installed by:
Joe V
Employee Cole B
Installed by:
Cole B
Employee Dustin K
Video Edited:
Dustin K

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.