Replacement Motor and Blades for Ventline Ventadome V3094

Question

Question:

Looking for a replacement fan motor for my v3094 dexter ventadome and blades if needed. Is this the correct part?

asked by: David M

0

Expert Reply:

Yes. If you've got a Ventline E-Z Lift Ventadome Trailer Roof Vent w/ 12V Fan - Manual Lift - Smoke - Canada Approved # V3094-603-00C, which is the same as the V3094 you mentioned, then the Replacement 12V DC Motor for Ventline, Ventadome, and Vanair Fans # BVD0218-00 is the correct replacement motor. If you also need the fan, that can be replaced with the Replacement Fan Blade for Ventline E-Z Lift Ventadome Trailer Roof Vents # BVE0114-00.

expert reply by: Erik B

0

Answer 1

I found that the cutout hole dimensions of of your iRV63 are 6.75" wide x 4" tall x 7" depth. If you wanted to replace the unit with a similar unit I recommend the iRV RV Stereo - Double DIN - AUX/USB, Bluetooth, App Control - 270W - 3…

view full answer...

Answer 2

For your Ventline E-Z Lift Ventadome Trailer Roof Vent w/ 12V Fan #V3094-603-00C, the correct replacement motor is going to be the: -Replacement 12V DC Motor for Ventline, Ventadome, and Vanair Fans #BVD0218-00.

view full answer...

Answer 3

The correct replacement for a Power Gear Motor 1010001093 is the Replacement Motor for Lippert Power Gear Electric Leveling Jack System part #LC89CJ.

view full answer...

Answer 4

The motor you'd looked at, part #BVD0218-00 is the correct replacement for your range hood. I've confirmed this by forwarding your photo to the folks at Ventline.

view full answer...

Answer 5

The replacement motor for the Greystone RV Range Hood with Light - 12V - 24" Wide - Black Item #324-000087 is the Replacement 12-Volt DC Fan Motor for Ventline RV Range Hood Item #BVD0218-00. If you also need to replace the fan blade the correct…

view full answer...

Answer 6

The correct replacement motor for your Rs-385phc2-17100b Vdo218-00 Kinmore Vent is going to be the Replacement 12V DC Motor for Ventline, Ventadome, and Vanair Fans Item #BVD0218-00.

view full answer...

Answer 7

Thank you for the photo! For your Ventline Range Hood PH CC0431-09 you're either going to need the motor #BVD0218-00 or the motor #BVD0218-00C. The first motor is for an unlisted range hood while the second motor is for a CSA range hood. To…

view full answer...

Answer 8

Hey Mark! From what the Grand Design parts site shows your 2023 Momentum 395MS has 7k Lippert axles. The correct replacement is the Trailer Hub and Drum Assembly for Lippert ABS System #LC49PX. Do you just need the hub/drum assembly or do you need…

view full answer...

Answer 9

The correct replacement motor for a Ventline Vent Fan V2094 is the Replacement 12V DC Motor for Ventline, Ventadome part #BVD0218-00.

view full answer...

Answer 10

Great catch, Jayden, here’s how to tell: #LC27PX uses 1/2inch wheel studs for 5.2K - 7K axles #LC49PX uses 9/16inch studs heavier-duty for 7K axles. Both are 8 on 6-1/2inch bolt pattern with ABS sensor ring built-in. You can measure the stud diameter…

view full answer...

Answer 11

Yes, the hose outside diameter is 3 inches. The RhinoFLEX RV Sewer Hose w Swivel Fittings, 4-in-1 Adapter, and Storage Caps - 15' Long #CAM39761 with its attachments fits 3 inch slip and also 3 inch , 3-1/2 inch, and 4 inch threaded pipes.

view full answer...

Answer 12

The RhinoEXTREME RV Sewer Hose w Swivel Fittings, 4-in-1 Adapter, and Caps - Black - 15' Long #CAM39861 is compressed to a length of approximately 6-1/2 feet. I went out to the warehouse to measure it for you. If you are wondering if it will fit…

view full answer...

Replacement Motor and Blades for Ventline Ventadome V3094

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching