Replacement Fan Blade for Ventline Ventadome Trailer Roof Vents
(446 reviews)
Price: $12.04
In Stock
Replacement Fan Blade for Ventline Ventadome Trailer Roof Vents
Item # BVD0215-00
Retail:$31.25
Our Price: $12.04
You Save: 61%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (446)
- Q & A (0)
- Photos
Ventline Accessories and Parts - BVD0215-00
- RV Vents and Fans
- Roof Vent
- Fan Blade
- Ventline
- Ventadome
Replaces a lost or damaged blade on the 12-volt fan in your Ventline Ventadome RV roof vent for motor homes and enclosed trailers.
Features:
- Replaces a fan blade on Ventadome roof vents for motor homes and enclosed trailers
- Works with Ventline Ventadome roof vent models V2094 and V2119 (2002 and newer)
- Made in the USA
Specs:
- Overall diameter: 6"
- 3/32" Diameter bore
This fan blade won't fit older, obsolete motors. If your Ventline roof vent has an older motor, it will have to be replaced along with the fan blade. To determine whether you have an old or new motor, measure the length of the motor from end to end (excluding shafts and mounting hardware, measuring just the case.) If the motor measures 2", it is an older motor and should be replaced with the fan blade. A new motor measures 1-1/2" in length.
BVD0215-00 Ventline Fan Blade for 12V Standard Ventadomes
Customer Satisfaction Score:
100% were satisfied with this product
0% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Replacement Fan Blade for Ventline Ventadome Trailer Roof Vents - BVD0215-00
Average Customer Rating: 4.8 out of 5 stars (446 Customer Reviews)
Replaces a lost or damaged blade on the 12-volt fan in your Ventline Ventadome RV roof vent for motor homes and enclosed trailers.by: Matt12/01/2022
Perfect fit and replacement part. Fan now works as expected.
by: Thomas 01/03/2022
Fit the new electric motor perfectly. Was bummed out that I needed the new motor to replace the fan, but I understand after 20yrs, some parts are no longer available.
Thomas
1/4/2023
Its been a year now and the new electric motor is still working well. No issues !
by: Kirk W.02/03/2019
The correct replacement for this application and easy to install. It took longer to remove the screen than to install the fan that you simply push in place onto the motor spindle. Removing the old dried out piece took a minute to let WD40 help loosen it up.
Work fine and hope it lasts another 14 years.
by: Frederick 02/16/2023
Alison B., Thank you for your time in getting my parts to me in a timely matter. Now, I can exhaust the bathroom humidity thru roof vent and not throughout the trailer.
by: Jon 08/16/2023
Was exactly what I needed. What a great experience
by: Wayne T.11/17/2016
Perfect fit for my bathroom vent. Ordering was simple and shipping was quick. I will order from them again.
by: Bruce 10/18/2021
Exact replacement, easy install!
Bruce
10/19/2022
No longer own the RV that this was installed in.
by: Barry - Australia05/13/2017
Great service and prompt delivery. My items were sent to a friend in the USA who in turn forwarded them to me in Australia.
The items are as described and were a direct replacement for the original parts, both of which disintegrated on the same day - a pre programmed life span perhaps? Long hours exposed to our harsh sunlight played a major part in turning the fan blades brittle I expect.
Barry A.
5/14/2018
All good thanks.
by: Silfee,05/25/2023
Easy to order, quick shipping, quality part.
by: Gatos407/14/2016
We ordered 3 vent fan blades, 2 fan switches, and 3 fan motors for our travel trailer. One set was to replace an existing vent fan motor and blades. The repair was straightforward and required no additional parts. The other two sets (blades, switch, and motor) were new installation in existing vents in a 2005 camper. We were happy to be able to find parts at etrailer.com that would fit the crossbars and vent screens currently in place so that we didn't have to change those out. We did have to go to an automotive supply store for wire connectors so that we could connect the new fans to the wiring in the ceiling. Our only concern is that the new motors attach to the mounting bracket with only one screw, and then the bracket attaches to the crossbar with only one screw. On the fan where we replaced parts, both the motor and the bracket are attached with two screws. We hope that the new fans will help us manage the interior temperature of the camper more easily.
by: Cody G. 08/12/2013
This worked for my trailer's Ventline Ventadome. Had to replace the other one as it rotted away in the sun and broke into many pieces.
Plastic is sturdy.
Cody G.
3/31/2015
Still working! Simple plastic piece, I would hope so!
by: Dave W10/08/2016
I wanted a vent fan for my small RV bathroom, but didn't want to compromise the currently waterproof seal of the existing roof vent. So, I bought these pieces and made up a new plate to mount the motor to the existing metal crosspiece. I got power from the nearby ceiling light and mounted a pull chain switch in the ceiling. Not the easiest job in the world, but it beat tearing the old vent off the roof.
Re: the components - I only used the motor and wiring harness. The motor is surprisingly powerful, given its size and does a nice job spinning the fan blade. I think it will move quite a bit of air.
by: Domenic M.10/21/2016
Fan arrived when promised and in perfect condition. The bathroom exhaust stopped working on our RV last time out so I ordered a new motor (and fan since I damaged it during disassembly).
The motor (and fan) is a perfect fit, order was received when promised and best price! (Nearly $50 locally vs $XX... delivered)
Only complaint is there was an excessive amount of room in the box with very little "stuffing" and the motor tore loose from the package inside the box. Very minor issue since the product was not damaged but I believe it was luck that prevented the motor from damaging the (plastic) fan. With more secure packing for shipping [the motor], I would definitely give 5 stars.
Thanks etrailer, I'll be back for future needs!
by: Sharon 04/29/2021
It’s great, got our bathroom fan working like new.
Sharon
4/30/2022
It’s still working great no problems.
by: Richard02/06/2013
The product itself is a direct replacement for the original Ventline fan blade. It installed quickly and easily.
Richard
2/6/2014
The replacement fan blade functioned perfectly after an easy install. Traded the trailer with replacement fan blade in May 2013.
by: Gary 02/14/2023
What I needed fast shipping good product
by: Bill R11/19/2015
Ordered a replacement Ventline fan blade to replace the original blade that failed due to age. Ordering was simple and the item arrived quickly. The old fan was easy to remove and the new fan blade installed easily on the motor shaft. Used a pair of pliers to seat the new fan blade on the serrated shaft. Installation took about 15 minutes. Great place to shop for RV parts and accesseries.
by: Steven03/07/2018
Just installed my fan blade from etrailer and it fits perfectly! The fan that it replaced was a prior replacement fan that had a different blade orientation and base so I assumed that I might have problems! But, as it turns out, the original fan was not the correct fan blade and the one that I purchased from etrailer was the correct part for my motorhome vent. It works better than what was originally installed! I am very happy with the new fan blade from trailer.
by: Stuart R03/03/2014
Finally found the right replacement fan blade for my VentLine exhaust fan. I saw this exact same model number: BVD0215-00 on several websites, but when I zoomed in, they were all for a motor with a D shaft, not a round shaft, which is what this Ventadome Vent uses, with the newer motor, which is about 1.5 high cylinder only. Etrailer was the only place that I could find the replacement blade for a round shaft.. Ive included a photo, should be high enough resolution for you to see the round opening. So, for this ventline model v2094, this is the blade you need! Happy camping!
by: Jeff L.02/24/2017
Mounting hole in fan was a bit tight,but I got it mounted and it's working fine. The camper is a 2008 model and the motor measured 1 1/2", without shaft, per your video. I'm happy with my purchase!
Jeffrey L.
2/24/2018
Just fine...no problems!
by: Turlock2A06/04/2015
Perfect!
I finally got the right product, because of eTrailers superior description, measurements and pictures. Got the wrong size from another website and the run-around from Camping World.
I installed the fan motor and blade today and they work great!
I'll be buying from eTrailer every time I need RV parts!
by: Marc G04/30/2017
3rd order in 3 weeks and all have come quickly and we're correct; haven't put the spare tire cover on yet but should be as described; the fan motor in the order was simple to install and worked well; somewhat concerned with a single screw mounting set up opposed to the two screw mounting of the older motor that was removed but it seemed to mount snugly enough; time will tell; the replacement fan blade presses right on and worked well.
by: james10/22/2013
fan blade was a direct replacement, fast shipping reasonable prices.
cheap manufacturers product but it is all that is available, not etrailers fault!
James
10/22/2014
Although i have only used it 2 short times, it has worked great.
by: Jim W09/03/2016
While on the road in my 2006 Arctic Fox travel trailer, I turned on the bathroom, ceiling, vent fan and the blade disintegrated. Motor and fan appeared to be a single unit and motor was permanently tacked to the cross-piece. Fearing that I would have to replace the entire fixture, I pulled up the e-Trailer site and was very happy to find instructions for replacing the fan blade and reference to the correct part number. Ordered new blade, and one extra, had the part in three days and vent repair took less than 10 minutes! Best site and service I've found for RV and trailer repair parts and info.
25
446
Show More Reviews
See what our Experts say about this Ventline Accessories and Parts
- How Does the Ventline Replacement Fan Blade Fit Onto the Motor in Ventline Vent V2094The replacement fan blade, # BVD0215-00, does just push onto the shaft of the motor. It is a tight fit so it does not need any additional fasteners. There are some grooves in the shaft, see picture, that allow it to grip the fan.
view full answer...
- How to Remove a Roof Vent from a TrailerDo you know the make and model of the roof vent you have on your trailer? If you were able to provide me with this I would then more than likely be able to give you step by step advice on how to remove the vent but as trailer manufacturers do not provide us with the make and model of the roof vents on their trailers, I would not be able to give exact steps. However, the process to remove a roof vent is fairly standard. There is an interior ganish on most vent's that is either glued or screwed...
view full answer... - Ventline Fan V2094 Replacement Fan Blade RecommendationYes, the Replacement Fan Blade for Ventline Ventadome Trailer Roof Vents # BVD0215-00 that you referenced is the correct fit for your roof vent model V2094. I have attached a review video link for you to check out.
view full answer... - Replacement Fan Blade For A Ventline Ventadome RV Roof VentYes, the Replacement Fan Blade for Ventline Ventadome Trailer Roof Vents # BVD0215-00 would be a fit for your Ventline Ventadome RV roof vent.
view full answer...
- Tip for Removing Screen of Trailer Roof Vent to Clean itIf you check out the video I attached to this page you'll see a general guide for removing the screen of a roof vent in the the first minute of the video. This process is basically standard amoung trailer roof vents so this process will be accurate for your vent. We don't have a way to know what vent you have in your trailer as that's not info manufacturers keep and people change them frequently though.
view full answer... - Will Ventline Ventadome Trailer Roof Vents # BVD0215-00 Fit a Vent with Model No. V2094Yes, the Replacement Fan Blade for Ventline Ventadome Trailer Roof Vents # BVD0215-00 that you referenced is compatible with your roof vent model V2094. I have attached a review video that you can check out.
view full answer... - How to Remove Enclosed Trailer Roof Vent ScreenWe have a video that outlines the procedure for removing the roof vent screen, click on the provided link to view the video. The procedure will involve removing the interior trim as well as the knob or crank, and then the screen can be removed by taking out the screws that hold it in. Because your vent has a fan, the procedure might be slightly different, but the video will still provide you with a good idea of how the vent goes together.
view full answer... - How to Determine if a Ventline Vent Fan Motor is and Old Model or New Model to Replace Fan BladeThere isn't a year range for older to newer Ventline vents when replacing the fan blade. You will have to measure the length of the motor from end to end excluding the shaft and mounting hardware. If the motor is 2 inches long it is older and if the motor is the shorter 1-1/2 inch then fan blade # BVD0215-00 will fit.
view full answer... - Replacement Roof Vent Fan Blade For Older Elixir Roof VentWhat you sent in a picture of looks to be the part # BVD0215-00 but installed backwards. Is the overall diameter 6 inches and the bore in the center 3/32 inch? If so this is what you need for a replacement.
view full answer... - What Direction Will the Replacement Ventline Fan Motor Shaft Rotate?The Replacement 12V DC Motor for Ventline, Ventadome, and Vanair Fans # BVD0218-00 does not have a specific direction of shaft rotation. The wiring will dictate the direction of the motor. The Replacement Fan Blade for Ventline Ventadome Trailer Roof Vents # BVD0215-00 is designed so the motor will rotate the blade counter-clockwise and that is how it is wired from the factory. I've attached a video to assist.
view full answer... - Replacement Ventline Vent Motor and Fan Blade for 12 Volt Powered Trailer VentBased on the numbers provided and the description of the parts fan motor # BVD0218-00 is the correct replacement motor. The numbers you see on this fan are different because Ventline updated the motor but it still fits the same vents as the old motor. And for the 6-blade fan use # BVD0215-00.
view full answer... - Ventline Roof Vent Fan Motor ReplacementThe correct replacement for your VentLine Roof Vent is the Replacement 12V DC Motor for Ventline, Ventadome, and Vanair Fans part # BVD0218-00. Check out the video I attached on the replacement process.
view full answer... - Replacement Motor for Older Ventline Exhaust FanThe correct replacement motor for your Ventline Exhaust Fan should be the Ventline # BVD0218-00. This 12V DC motor may differ slightly from your original unit, especially if you have an older model. The motor has simply been upgraded a bit from the original, but will still serve as the replacement part. Just note that when replacing the motor on an older model vent, a new fan blade # BVD0215-00 will also be required. I have attached an installation video that you can use for reference.
view full answer... - Replacement Motor and Fan Blade For Ventline V2094 Exhaust SystemYes, the replacement motor you need for your V2094 Vent is the part # BVD0218-00. The replacement fan blade is part # BVD0215-00 as well.
view full answer... - Replacement Fan Motor And Blades For A Ventline V2095 Roof VentIt sounds like you need a replacement motor for your Ventline V2095. You can use the Replacement 12V DC Motor for Ventline, Ventadome, and Vanair Fans # BVD0218-00 as a replacement. Since this is the newer motor, you'll also need to replace the fan blades # BVD0215-00 as well.
view full answer... - Fit and Compatibility of Ventadome Blade and Motor on Roof Vent The fan blade # BVD0215-00 you were looking at will fit Ventadome roof vent models V2094 and V2119 (newer models only). This fan blade has a 3/32 inch diameter bore. The fan motor # BVD0218-00 you were looking at will fit models V2094, V2119, and VP-543. If you could tell me which model of Ventadome roof vent you have I would be more than happy to help you figure out if this is the right blade for your vent.
view full answer... - Fan Blade Replacement for Ventline HC385M6 MotorI do have an option for you but there is no longer a replacement fan blade for the motor you have now. In order to replace the fan blade you would need to upgrade to the Replacement Motor for Ventline part # BVD0218-00 so that you can then use the Replacement Fan Blade for Ventline Ventadome Trailer Roof Vents part # BVD0215-00.
view full answer... - Replacement Motor for Dexter Ventline 1.2 Amp Bathroom Fan Motor Model V2094The correct replacement motor for a Ventline Vent Fan V2094 is the Replacement 12V DC Motor for Ventline, Ventadome part # BVD0218-00.
view full answer... - Fan Motor Stopped Working on Ventline Trailer Roof Vent FanI spoke with my contact at Ventline about the play in your fan's motor. He is unsure what caused the play, and he said that the motor cannot be fixed. To replace the motor in a Ventline Ventadome or Vanair roof vent, you will want to use the Ventline Replacement 12-Volt DC Fan Motor # BVD0218-00.
view full answer... - Replacement Fan Blade for Ventline Roof Vent FanFor starters, you are going to want to measure how long the motor you have now is from from end to end (excluding shafts and mounting hardware). You will need to remove the screen in order to do this. If the motor is 1-1/2" long then you have the new motor and can just use the Replacement Fan Blade for Ventline Ventadome part # BVD0215-00. However, if the motor you have now measures 2" long then this is the old motor and they do not make a fan blade that fits it so you would need to replace...
view full answer...
- Replacement Fan Recommendation for RV Bathroom VentI am impressed with all of the information you gave me. We don't always get such thorough questions. But to answer your question, yes, the part # BVD0215-00 would be the correct replacement fan for your RV vent. Had you needed the motor as well you would want the part # BVD0218-00.
view full answer... - Replacement Roof Vent V2094 Motor RecommendationThe correct replacement motor you would need for your V2094 Vent is the part # BVD0218-00. It sounds like you have the older version of this vent so you would also need to upgrade the fan blade as well with part # BVD0215-00.
view full answer... - Replacement Venline V2094 Fan Blade RecommendationThe replacement fan blade for a Ventline Roof Vent V2094 is the part # BVD0215-00 as long as it's the newer style vent. This fan blade won't fit older, obsolete motors. If your Ventline roof vent has an older motor, it will have to be replaced along with the fan blade. To determine whether you have an old or new motor, measure the length of the motor from end to end (excluding shafts and mounting hardware, measuring just the case.) If the motor measures 2", it is an older motor and should...
view full answer... - Recommended Replacement Fan Blade For Replacement Motor Needed For Ventline Roof VentI would recommend using caution when modifying the fan or the motor. I am not sure super glue is a great way to attach the old fan to the new motor. It is recommended to replace the fan at the same time you replace the motor. The fan that would work with the motor you referenced is part # BVD0215-00. Replacing both items will ensure a good fit and you won't have to worry about the parts working together. You mentioned the new motor was longer than the old one. You want to make sure the...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Installed by:
Joe V
Installed by:
Cole B
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Written by:
Raymond P
Video Edited:
Dustin K
Updated by:
Wilson B
Updated by:
Manda E
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Matt
12/2/2023
Still spinning and venting like a champ.