Are Trailer Brakes Brakes Needed for 1000 lb Pop-Up Camper

Updated 07/22/2020 | Published 07/20/2020

Products Featured in This Question

etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"

(1254)

$137.92

1-7/8" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 2,000 lbs

(2634)

$11.68

Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K

(3492)

$39.76

2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs

(1361)

$11.31

Curt Echo Wireless Brake Controller - 7-Way Plug-in w/ Bluetooth App - Up to 2 Axles - Proportional

(1803)

$289.95

7-Way RV Upgrade Kit for Trailer Brake Controller Installation - 12 Gauge Wires

(352)

$95.93

Question:

Towing a 1000 pop up camper. Do I need the Brake System. 2015 Chevy Equinox

asked by: Elizabeth

Expert Reply:

It will depend on what state you are located in. In most states, trailer brakes aren't required unless the trailer weighs 3500 lbs or more. This being said, if your pop-up is already equipped with them, it's not a bad idea to use them.

If your popup is equipped with brakes, and you'd like to use them, the easiest way to make that happen if you have a smart phone would be by using the Curt Echo # C51180. If your Equinox has a 7-way trailer connector, the controller install would be plug and play. If you have the typical 4-pole trailer connector, in addition to the Curt Echo you'd need the # ETBC7L install kit. If you don't have a trailer connector at all, you'll need the # 118494 wiring kit and the # ETBC7L kit.

The etrailer # e98865 hitch you'd looked at would be perfect for your Equinox. In addition to the items mentioned above, you'll also need a ball mount and a trailer ball. The typical coupler height is around 17 inches, so to place your trailer ball at around the correct height you'll need a ball mount like # 2753. For a 1-7/8 inch trailer ball, use # 19260 or # 63845 for a 2 inch ball.

I've linked to some installation videos that you might find helpful.