Replacement Strap Recommendation for Dutton-Lainson Hand Winch # DL14627
Updated 08/22/2019 | Published 08/21/2019 >
Products Featured in This Question
Question:
Strap replacement for the DL1802A. Need strap replacement. Have had problems with strap stretching after being tight to bumper and locked. When pulling up ramp strap stretches 8 to 10 inches. Leaving boat quite a distance from bumper and wench. During highway travel strap shredded . Would like stronger strap. Any suggestions? Wench work great.
asked by: Wilson
Expert Reply:
For a replacement strap that will work great with your Dutton-Lainson Hand Winch # DL14627 I highly recommend the Dutton-Lainson # DL24249. This is a really durable 2 inch wide, 25 foot long strap with a breaking strength of 4,000 pounds. It includes the mounting hardware, hook, and is made right here in the USA.
I have attached a short video review that you can check out as well.
Product Page this Question was Asked From
Dutton-Lainson Hand Winch - TUFFPLATE Finish - Single Speed - 1,800 lbs
- Trailer Winch
- Standard Hand Winch
- Boat Trailer Winch
- Utility Winch
- 1001 - 2000 lbs
- Standard Hand Crank
- Single Speed Winch
- Wire Rope
- Polyester Strap
- Dutton-Lainson
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Video: Hand Winch Strap with Safety Hook, 2" Wide x 25' Long Spec Review
- Shop: Dutton-Lainson Hand Winch - TUFFPLATE Finish - Single Speed - 1,800 lbs
- Shop: Replacement Drop Leg for etrailer and Ram Square Direct Weld Jacks - 3K
- Video: Replacement Drop Leg for etrailer and Ram Square Direct Weld Jacks Review
- Video: etrailer Trailer Jack TJD-7000-FT Review
- Shop: Replacement Drop Leg with Foot for etrailer and Ram Square, Direct Weld Jacks - 7,000 lbs
- Q&A: Shelby 5408B Winch Replacement Recommendation
- Q&A: Replacing a Shelby 5407B Winch Rated for 1,700 lbs
- Q&A: Replacement Parts and Winch for a Profile 2000 Hand Winch
- Q&A: Do You Have A Replacement Handle For My Shelby Winch 5408B?
- Q&A: Recommendation to Replace Shelby 5408 Trailer Winch
- Q&A: Does etrailer 5K Electric A-Frame Jack Need an In-Line Fuse?
- Q&A: Is The Dutton-Lainson DLB1500A Winch Supposed To Have a Circular Hole Between The Oblong Slots?
- Article: Trailer Lighting Requirements
- Article: How to Choose the Best Winch for You, your Boat, and your Trailer
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Most Popular Wheel Bearings
- Article: How to Install a Brake Controller on Chevrolet / GMC 1999-2006 Pickups


