Timbren Timbren Rear Suspension Enhancement System for 2016 Ram 3500 Mega Cab DRW

Question

Question:

Will the TDR3500CA fit my truck? I think they will just want to be sure. Also some of the reviews said they had to retap the threads. Because of weld lag. Has that been fixed?

asked by: Jim

0

Expert Reply:

The Timbren # TDR3500CA Aeon springs are a fit for your truck.

According to Timbren, there was a manufacturing run that had weld spatter on the threads, but this was an isolated incident that occurred some time ago. The problem has been taken care of and doesn't affect any of our current stock.

I've linked you to an installation video.

expert reply by: Mike L

0

Answer 1

For your 2019 Ram 3500 single rear wheel the correct fitting Timbren kit is part #TDR3500CA that you referenced. Timbren has confirmed for us that this does fit your truck. It fits a few years of the Ram trucks which might be why you've seen…

view full answer...

Answer 2

The Dexter 2-Tang Clevis #T1807800 has mounting holes that will line up with the BulletProof Hitches 2-Ball Mount for 2-1/2" Hitches #MD254, but the Clevis uses 3/4" pins while the BulletProof shank uses 5/8" pins for the ball mount.…

view full answer...

Answer 3

For your 2003 Chevy Silverado BullRing has the BullRing Retractable Tie-Down Anchors for Truck Bed Stake Pockets - Raised Fit - 1,000lbs - Qty 4 #BU85FR or the #BU25FR for a quantity of 6. For your 2019 Ram Bullring has a stainless steel flush-fit…

view full answer...

Answer 4

I have the perfect solution for your 2019 Ram 3500 for suspension enhancement. The Timbren kit part #TDR3500CA which is a custom fit for your truck gives you all the support you need without ever having to worry about air bag pressure or air leaks…

view full answer...

Answer 5

Hey Ronald, our part number #T98GR is the same as the Timbren part number DF25004F so if you order the #T98GR that is what you'd get from us. This is the correct Timbren front kit designed for your 2023 Ram 3500 as well. Are you running a plow…

view full answer...

Answer 6

Hey Jason, thanks for reaching out! The Timbren Rear Suspension Enhancement System #T94VR is the best Timbren kit for your 2024 Ram 3500 because the other Timbren kit, part #TDR3500CA, is designed for standard use while the T94VR is the severe…

view full answer...

Answer 7

I understand the confusion based on the difference in capacity. The key is the difference in design. The Timbren Rear Suspension Enhancement System #T94VR is designated as a Severe Service kit so the springs are always engaged. Although the capacity…

view full answer...

Answer 8

Hello Phil! Sure can! The Lippert 3,500 lb axles use a standard brake size and bearing combination, so we can absolutely provide self-adjusting brakes and new hubs for that. Here is what I recommend: - etrailer Electric Trailer Brakes -…

view full answer...

Answer 9

Hello Tony, I really wish I had a database that tells me exactly what goes on each camper, but unfortunately, I don’t. Based on my research, you should have a 4,400-pound axle (you can double-check your axle tag to confirm). If it is NOT a Lippert…

view full answer...

Answer 10

You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Timbren Timbren Rear Suspension Enhancement System for 2016 Ram 3500 Mega Cab DRW

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching