Looking For Electric Brakes And Hub/Drums For Lippert 3,500 lb Axle
Updated 11/11/2025 | Published 11/05/2025
Products Featured in This Question
Question:
Would like help in finding Trailer electric brake assembly and drum. I currently have a Lippert 3500 lbs. axel with B10E-22 Axletek-10-GG brake assembly. I wish to change to self-adjusting brakes, can you suggest any full brake kits for my two axel trailer?
asked by: Phil S
Expert Reply:
Hello Phil! Sure can! The Lippert 3,500 lb axles use a standard brake size and bearing combination, so we can absolutely provide self-adjusting brakes and new hubs for that. Here is what I recommend:
- etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K # AKEBRK-35-SA
- Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased # AKHD-545-35-EZ-K
Our brakes are actually made by Axletek so they will be quite similar to what you have now, only self-adjusting. The hubs come pre greased with bearings, races, seal, lug nuts and grease cap. Keep in mind the brakes are sold as a pair, and the hubs are sold individually. The hubs are 5 on 4-1/2" bolt pattern which is standard, but please still confirm this matches your wheels.
Are both axles equipped with brakes? Or just one?
Let me know if there is anything else I can do to help!
(click to enlarge)
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 13 Inch Wheel
- 14 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Search Results: axletek 10" x 2 1/4" electric brake assembly
- Search Results: trailer suspension parts
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 6 on 5-1/2 - Pre-Greased
- Q&A: Replacement Trailer Brake Assemblies with Axletek-10-GG On Assemblies
- Shop: MORryde X-Factor Crossmember for Standard Frame Hangers
- Shop: Dexter Bearing Kit for 4.4K Axles - Inner and Outer Bearings LM67048/L68149
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps
- Shop: MORryde ALLTREK 4000 Shock Absorbing Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K
- Q&A: What are the Correct Bearings, Races, and Seals for 4,400 Pound Axle?
- Search Results: gas and electric rv water heater
- Search Results: bumper end cap
- Search Results: 25580 / lm67048 trailer hubs and drums
- Search Results: for 4400 lbs axles trailer hubs and drums
- Search Results: hitch load extender truck bed extender
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps
- Q&A: Selection of Timbren Rear Axle Suspension Kit for 2006 Ford F250 Crew Cab Short Bed 4WD
- Q&A: Which Timken Grease Seal for Trailer Hub Replaces GS-1719 DL
- Q&A: Replacement Brake Shoes For Al-KO 10" X 2-1/4" Electric Brake Drums On a 2002 Forest River Flagstaff
- Video: Review of Timken Trailer Bearings Races Seals Caps - Bearing L44643 Race L44610 - TMK34ZR
- Video: Installing the Timken L68149 Trailer Wheel Bearing on a 2022 Forest River Rockwood Geo Pro Travel Tr
- Video: MORryde Suspension Upgrade Kit for Tandem Axle Trailers w Correct Track Feature Review
- Video: Ultimate Overview of the MORryde Suspension Upgrade Kit for Tandem Axle Trailers
- Video: Timbren Manufacturer Spotlight - Suspension Enhancement
- Video: DIY Install: Timbren Rear Suspension Enhancement System on your 2005 Ford F-250 and F-350 Super Duty
- Video: Setting up the Pop and Lock Custom Tailgate Lock on a 2006 Ford F-150
- Article: Trailer Wiring Diagrams
- Q&A: Comparing the eTrailer and Dexter Electric Trailer Brake Kits
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Electric Trailer Brakes: How They Work & What to Buy
Phil S.
11/10/2025
Thank you Jesse I appreciate you doing the leg work for me. Yes both my axles will require full brake kits 4 brake assembles total and have confirm hubs to be 5 on 4-1/2” bolt pattern. However regarding the 4 mounting bolts on the backing plate (Akebrk-35-SA), I have measured bolt spacing to be 3” from each other and there is no mention of this dimension anywhere, can you confirm the backing plate mounting bolts to be 3” spacing? Thank You Phil