Titan Clevis Hitch - Clevis Mount - T1807800 Review

Products Featured in this Video

Dexter 2-Tang Clevis - Adjustable Channel Mount - 1" Pin Hole - 20K

24 reviews

Code: T1807800

Retail: $73.40

Price:  $67.93

• Clevis Hitch
• Clevis Mount
• Adjustable Channel Mount

• 20000 lbs GTW
• 1 Inch Diameter
• No Shank
• Dexter

Heavy-duty clevis attachment can be used as a connection point for a lunette ring or as a ball mount for standard towing. Sturdy steel has a raw finish. Adjustable channel bracket, hardware, and clevis pin sold separately. Requires 3 bolts to mount.

Do you have a question about part T1807800?more information >     

Review of Titan Clevis Hitch T1807800

Today, we're going to be taking a look at the Titan 2-tang clevis adjustable channel mount. This unit features a weight capacity of 20,000 pounds. The 2-tang clevis is designed to couple with a lunette ring. Your clevis pin is sold separately. The platform with the hole can be used as a ball mount for standard towing. The adjustable channel mount design really lets you change the height of the clevis depending on your application, so this piece right here would actually fit into a channel mount.

It needs to have an inner width of 3 inches, and then you could slide this up and down to adjust the positioning to fit your application. Channel bracket mounting hardware are sold separately. We do have them here at etrailer.com if you're in need. This one does require 3 mounting holes and 3 mounting bolts to get it fully installed. The unit is made from a sturdy steel construction with the raw finish. It is designed for 3 inch wide channel brackets.

We can tell that by taking a width measurement of this back edge, should be just under 3 inches, so you can see there just measures under that 3 inch mark. The mount holes on the unit, these are separated on center by 2 inches apart. The clevis pin hole diameter, that's this hole right here, that's going to give us a diameter of 1 inch. The tang separation is going to measure 2 1/2 inches, and then from top edge to edge, that's going to give us a measurement of .. Looks to measure pretty close to 4 1/4 inches.

If we take a measurement from the back of this area right here to the closest edge of the pin holes for the clevis, that's going to give us a measurement of about 1 3/4 of an inch. That's going to do it for today's look at the Titan 2-tang clevis.