Boat Trailer To Carry A Hobie Wave

Question

Question:

Do you have a boat trailer that will work for the Hobie wave? I’ll need a mast stand as well.

asked by: David F

0

Expert Reply:

We do have a boat trailer to fit your Hobie Wave, but we do not have a mast stand. The boat trailer is the CE Smith Multi Sport Plus Boat and Kayak Trailer w/ Bunks - 12" Wheels - 14' Boat - 800 lbs, part # CE48870. It can carry boats up to 14' in length.

I have included a video review link below.

expert reply by: Mark Smith

0

Answer 1

I wasn't able to find anything in regard to a replacement part for your TDE 11029C hub assembly, but if you can pull your hub and either look for bearing/grease seal parts numbers or measure the different locations on your spindle then I can see…

view full answer...

Answer 2

Yes, we do have a couple of idler hubs that fit the item #L44649 inner and outer bearings on your Venture boat trailer. They come in two different lug pattern sizes and are designed specifically for boat trailers. I couldn't get any information…

view full answer...

Answer 3

The size of a Bearing Buddy will not be enough to determine the replacement bearings you need. In order to find the correct wheel bearings, you need take apart your hub assembly and looking at the bearings themselves; wipe away the grease and you…

view full answer...

Answer 4

In order to determine if hub assembly 8-258-50UC1-EZ will work for you, first know that this assembly is for EZ Lube spindles that require a grease seal with a 1-1/2" inner diameter such as #RG06-020. You are also going to want to remove the hub…

view full answer...

Answer 5

The Lippert Components Heavy-Duty Replacement Shock - Yellow #LC283280 is 8.625 inches compressed and 13.5 inches fully extended. Your current suspension may extend and retract slightly further but the shocks will be a good replacement based on the…

view full answer...

Answer 6

In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. This is so you get a hub that is compatible with your…

view full answer...

Answer 7

We have a really great option for a trailer for your 10 foot Bass Pro Pond Prowler boat, although the Malone trailer you mentioned has been discontinued by the manufacturer and is no longer available. Instead, which I highly recommend is an option…

view full answer...

Answer 8

Hey Greg, the extended trailer tongue for the CE Smith trailers part #CES45FR is going to make the tongue of the trailer an additional 18 inches longer than before on the #CE48870. How long is your boat?

view full answer...

Answer 9

Hello Justin, thanks for reaching out. The Replacement Extra Long Trailer Tongue for CE Smith Multi-Sport Trailers #CES45FR may work for you, but it really depends on the configuration of your motorcycle trailer. The CE Smith tongue is designed to be…

view full answer...

Answer 10

The CE Smith Boat Trailer part #CE48810 comes with guide ons which help to center your boat during loading and to hold the boat during transport so I don't really recommend adding anything additional in regards to this aspect because of the size…

view full answer...

Answer 11

Hey Bob, The 48810 comes with a 72" long tongue so the Replacement Extra Long Trailer Tongue for CE Smith Multi-Sport Trailers #CES45FR at 90" would give you an additional 18" to the total length of the trailer.

view full answer...

Answer 12

The tongue on the Malone Malone MicroSport Trailer #MPG460G is 8' by itself and can be shortened using the Retractable Tongue Kit for Malone MicroSport Trailers #MPG494, which will reduce the overall length of the trailer from 13' to 9',…

view full answer...

Boat Trailer To Carry A Hobie Wave

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching