Information Needed to Pick Out Hub for Boat Trailer
Published 03/09/2018
Question:
I have a 1983 Shore Land’r Boat Trailer 1,000 grw I’m looking for wheel hub kit for it I know it’s a 5 lug I have know idea what other info to give you
asked by: John A
Expert Reply:
In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. This is so you get a hub that is compatible with your wheels. I attached an FAQ article on determining bolt pattern for you to check out.
Next thing you will need to know is what spindle you have on your trailer. In order to do that you can either get the inner and outer bearing numbers from a hub or use a dial caliper to get exact measurements of the spindle. The measurements needed are the parts of the spindle where the bearings ride.
If you get back to me with that information I will help you pick out the right hub assemblies. Or, you can follow the link I attached that will take you to the page that has all of our replacement hubs.
You would want to first select the bolt pattern that you have, next select the inner bearing you have, followed by selecting your outer bearing, and then all the correct hubs will be listed.
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- Pre-Greased
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: trailer tires and wheels
- Search Results: boat tie downs
- Search Results: 8~436
- Search Results: bow stop
- Search Results: bow
- Search Results: bow bracket
- Search Results: grease cap
- Video: Tie Down Side-Mount Spare Tire Mount Set Up
- Shop: Kenda 215/60-8 Bias Trailer Tire with 8" Galvanized Wheel - 5 on 4-1/2 - Load Range D
- Shop: Dexter Trailer Idler Hub Assembly for 2,700-lb Axles - Pre-Greased - 5 on 4-1/2 - Galvanized
- Article: How to Determine Tire/Wheel Diameter
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Video: Choosing the Best Trailer Bearing Races Caps and Seals
- Video: Review of Dexter Trailer Hubs and Drums - Galvanized Pre Greased Trailer Idler Hub Assembly - DX77UR
- Video: Feature Review CE Smith Offset Spare Tire Mount
- Q&A: Hub for E-Z Lube Spindle on Boat Trailer
- Q&A: How to Determine Correct Replacement Bearings
- Q&A: How to Find Replacement for TDE 11029C Hub Assembly
- Q&A: Recommended Replacement Hubs for a Tiedown 11029 Boat Trailer
- Q&A: Replacement Parts for 1970s Camper Frame with Dayton Fayette Axles
- Shop: Tie Down Side-Mount Spare Tire Mount - 4 and 5 Lug Wheels - Galvanized Steel
- Shop: Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2 - Qty 2
- Shop: EZ Lube Grease Caps with 1.99" OD - Fits 7" and 10" x 1-1/4" Dexter Hubs - Qty 2
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 5 on 4-1/2 - Pre-Greased
- Q&A: Boat Trailer To Carry A Hobie Wave
- Video: Checking Out the Steel Trailer Wheel
- Shop: Trailer Hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Trailer Wiring Diagrams
on Trailer Hubs and Drums
