Measurement Of Dexter Trailer Hub Assembly # 8-258-5UC1
Published 05/10/2017
Products Featured in This Question
Question:
Thanks again for your help. I could not find GVW on axle or trailer body, the stickers with numbers were un readable, trailer is 30 years old single axle. Can you tell me the front to back measurement on the hub # 8-259-5uci-ez. this is for a 8-12" wheel. Again my old hub is 3-3/8" front to back measurement with 5 lugs on 4-1/2" centers.
asked by: Clark S
Expert Reply:
The Trailer Hub Assembly # 8-258-5UC1 measures 4-1/4 inches from front to back. As long as you have the length on your spindle, you won't have any issue. That measurement is not including the grease cap, it is just the hub from edge to edge. There is 2 inches on either side of the hub face which is 1/4 inch thick.
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Idler Hub
- Standard
- L44649 / L44649
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Kenda 205/65-10 Bias Trailer Tire with 10" Galvanized Wheel - 5 on 4-1/2 - Load Range C
- Shop: Kenda 215/60-8 Bias Trailer Tire with 8" Galvanized Wheel - 5 on 4-1/2 - Load Range C
- Shop: CE Smith Spindle Axle - Weld on - 1-1/16" Diameter
- Q&A: How to Find Replacement for TDE 11029C Hub Assembly
- Shop: Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44649 Bearings - Pre-Greased
- Shop: Kenda Loadstar 205/65-10 Bias Trailer Tire w/ 10" Black Aluminum AM02 Wheel - 5 on 4-1/2 - LR E
- Shop: BTR E-Z Lube Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter
- Search Results: 8~259~5uc1~ez
- Video: All You Need to Know About the Dexter Trailer Idler Hub Assembly
- Search Results: st145r12
- Q&A: Recommended Trailer Hub For An 8" Golf Cart Trailer Wheel
- Q&A: Replacement Idler Hub Assembly for 2.2K Dexter Axle Torsion Axle
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: Which Hub to Use for 2,200 lb Dexter Axle 8-258 or 8-259
- Q&A: Using Star Shaped # 84545UC1-EZ Hub to Replace Existing Round Shaped Hub
- Video: All You Need to Know About the Dexter Trailer Springs Over-Under Conversion Kit
- Video: All About the Trailer Axle with Idler Hubs
- Q&A: Adding Lift to 3,500 lb Trailer Axle
Clark
5/10/2017
Thanks again for your help. I could not find GVW on axle or trailer body, the stickers with numbers were un readable, trailer is 30 years old single axle. Can you tell me the front to back measurement on the hub # 8-259-5uci-ez. this is for a 8-12" wheel. Again my old hub is 3-3/8" front to back measurement with 5 lugs on 4-1/2" centers.