Can the Custom Third Brake Light Camera for a 2020 Ford F-250 Be Wired To An Existing In-Cab Switch

Updated 06/25/2020 | Published 06/24/2020

Question:

Looking at purchasing Custom Third Brake Light Camera for 8inch Factory Monitor - Night Vision Item # 3460001 On the toggle switch. My f250 has several overhead 20 and 30 amp switches in the center of the cab. Rather than use the toggle switch can I use one of them. Thanks

asked by: Robert H

Helpful Expert Reply:

The Custom Third Brake Light Camera for 8" Factory Monitor part # 3460001 could pretty easily be wired to an existing switch you have in the cab but I would not be able to offer much advice on this as it's designed to be used with the included toggle switch. I will however say that you would need to maintain the fuse size recommendation for the system. It's a two wire switch so installation should be super simple.

expert reply by: Conner L