Camco RV Vent Installation Kit - Rubber Roofs or Sidewalls - White Butyl Tape

Part Number: CAM25013

155 Reviews | 180 Questions

In Stock

$13.04

Retail:$23.38

You Save: 44%

Add to cart

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

camco accessories and parts rv vents fans

camco accessories and parts rv vents fans vent install kit installation - rubber roofs or sidewalls white butyl tape

camco accessories and parts rv vents fans vent installation kit - rubber roofs or sidewalls white butyl tape

camco accessories and parts rv vents fans vent install kit

camco accessories and parts rv vents fans cam25013

camco accessories and parts vent install kit cam25013

Show All (8) Product Images

Show Fewer Product Images

Videos

Hands-On with the Camco RV Vent Installation Kit

Show All (1) Videos

Show Fewer Videos

Need help with installation?

Locate installers near me

This kit has everything you need to replace or install a roof vent, side-mount vent, plumbing stack, or refrigerator vent on an RV with a rubber roof or sidewall. Includes white butyl tape, mounting screws, and instructions. 1-800-940-8924 to order Camco accessories and parts part number CAM25013 or order online at etrailer.com. Free expert support on all Camco products. Great prices and Fastest Shipping for Camco RV Vent Installation Kit - Rubber Roofs or Sidewalls - White Butyl Tape. Accessories and Parts reviews from real customers.

Camco Accessories and Parts - CAM25013

Features:

Lets you replace or install a vent on your RV's rubber roof or sidewall
- Works for roof vents, side-mount vents, plumbing stacks, and refrigerator vents
Includes mounting screws, instructions, and white butyl tape that adheres to rubber surfaces

Specs:

Tape dimensions: 8' long x 3/4" wide
Number of screws:
- (24) #8 x 1" Slotted, hex-head screws
- (4) #6 x 1/2" Phillips-head screws
1-Year limited warranty

25013 Camco Universal Motor Home Vent Installation Kit - White Butyl Tape for Rubber Roofs or Sidewalls

Video of Camco RV Vent Installation Kit - Rubber Roofs or Sidewalls - White Butyl Tape

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Demo Camco Motorhome Accessories CAM25013

Hands-On with the Camco RV Vent Installation Kit

Video Transcript for Hands-On with the Camco RV Vent Installation Kit

Today we're going to review part number CAM25013. This is the Camco RV vent insulation kit for rubber roofs or sidewalls. This kit has everything you need to replace or install a vent on your RV's rubber roof or sidewall. It is designed to work for roof vents, side mount vents, plumbing stacks and refrigerator vents. It does include all the items shown here. It includes this 8 foot roll of butyl tape, which is 1 inch wide, and as you can see, the butyl tape is like acaulking compound. Basically this type of tape, this white butyl tape will adhere to rubber surfaces. It also comes with the screws pictured here, the 24 number 8 by 1 inch slotted hex screws, and the 4 number 6 by 1/2 inch Phillips screws. This kitdoes come with a one year limited warranty. And that should do it for the review on part number CAM25013, the Camco RV vent insulation kit for rubber roofs or sidewalls.

4.7

155 reviews

5 Stars		(122)
4 Stars		(23)
3 Stars		(6)
2 Stars		(1)
1 Star		(3)

by: Jay 06/01/2026

much easier to use than a tube of caulk. used it for a new ceiling fan for a metal popup camper roof. Didn't use the screws- instead got stainless steel washers and screws for the plastic fan base.

by: John 08/26/2026

The kit was a great thing to have. I didn’t use all of the screws, but I’d rather have extra. I wish the tape was just a little longer - I wanted to double up on two sides, but didn’t quite have enough.

by: Chris 06/18/2023 One Year Later

I used this to install my new range vent and my shore line door. It worked very well and was enough to do both. The sealing tape is still holding up and the painted screws still are good and white and has not chipped as of yet.
Another good etrailer part

Chris One Year Later

6/18/2024

The sealing tape has held up well and has not dried out yet. Main thing is theres NO LEAKS

by: Arthur 07/14/2018 One Year Later

Worked great during installation of topper for our slide out on the camper. No issues noted to date and no leaks from screws being installed. Great product and assistance from Etrailer service.

Arthur One Year Later

7/14/2019

Still going strong and no issues. Have made numerous trips camping for as long as 17 days on one trip and still no issues. Great products and expert assistance when needed by etrailer.

by: Brudgers 05/23/2020 One Year Later

The best part of the Maxxair MaxxFan Plus Roof Vent w/ 12V Fan and Thermostat Manual Lift 10 Speed was installing it myself. I had climbed to my van to it's perfect white metal roof. Run an extension cord. Plugged in the [hardware brand] jigsaw. Bzzzzz. Four inches of sliced virgin metal. Four inches of hole across the roof. An existential moment. No going back. No trial run. Only forward. Forward like the Merry Prankster's bus.

Only later did I realize the point of no return had long since past. It past when I drilled the pilot holes before making the crooked ragged jigsaw cuts.

Installation was empowering. It took me out of my comfort zone. Cutting a ragged hole in the roof changed the way I think about cars. And it all worked out. Installation was as straight forward as people say it is. The hardest part was my mental resistance to cutting the roof.

The vent doesn't leak. It moves air. It's quiet and does not draw much power. I love that it is reversible. At night, I set it to exhaust so light seeking moths don't die in the spinning blades. They are blown away instead of sucked in.

For the electrical. I fused both positive and negative off the battery. I ran the power wires through flex automotive conduit. I picked up the fusing, wire and flex conduit from my local Walmart after figuring out what I needed. The hard part of that was determining wire gauge based on the total length of the feeds. The length was longer than I would have guessed when I measured it.

And it all worked the first time I pushed the button. Great product. Great experience.

by: Bill W 04/08/2025

Bought this kit to install a range hood exterior vent. Man is that tape sticky !! Should definitely do the job.

by: Chris 12/11/2017

Worked as advertised. Relatively easy installation and good fit. Seems well built - much better than the fan we replaced! We have a 2005 34' Holiday Rambler RV and our old fan had essentially disintegrated. We just wanted a no nonsense manual fan that could work with or without the roof vent open (didn't need another remote!). Probably not 100% required to get the Butyl Tape kit if you use sealant of another type but highly recommended to ensure a tight seal and avoid leaks in the future.

by: Carlos 05/18/2016 One Year Later

Good quality and includes screws. Butyl tape arrived fresh and flexible and not dried out and hard as can happen with this product.

Carlos One Year Later

5/18/2017

Its butyl tape.... still providing a great seal and does not appear to have hardened

by: Robert 03/01/2018 One Year Later

Worked beautifully - pressed right in and conformed to the corrugations on my siding - great seal! I had removed all four vertical corner aluminum moldings on my TT; cleaned the siding; cleaned the molding/repainted. Re-installed with this new putty tape. Trimmed excess putty with Bondo plastic blade and the result was a professional finish. A year later the putty has not shifted or dried out (which was why I replaced in the first place). I dry camp in the hot Southwest a lot - so not having the putty dry out is paramount.

by: Steve H 06/30/2017

I've ordered several times from etrailer.com and always been happy. First, it's good not to feed the [on-line retailer] beast. Second, etrailer.com's website always has good solutions rather than my local trailer supply store which can be expensive on certain things. I found a bearing kit on etrailer.com that is a great value and perfectly matched my old bearings. I got my local brake shop to press the new bearing races into the hubs and I saved over $300 by doing it myself with the help of etrailer.com.

by: pdj 04/20/2017 One Year Later

The vent cover and the bathroom roof vent screen replacements were an exact replacement for my Arctic Fox. The putty tape was great. I couldnt be happier.

by: Mark 09/02/2019

I received the product in a timely manner in great condition. The fan installed exactly how it was described it worked exactly how I hoped etrailer is a great company to do business with they have great customer service, provide you with installation instructions and videos., and very reasonable prices I couldn’t ask for more .

by: Sfitz 08/29/2016

Picked up a used camper last October. I knew the old vent lid had duct tape on the hinge, and it gave out last trip. Ordered this one last week, got it today and was able to pull the old fan and drop this one in in around 45 minutes. The old vent was only held on with some butyl tape and dicor it appears.
I did a quick test to see that the fan ran, but I haven't finished up the trim yet. I think I need to trim the skirt that comes with it, but first impressions are that it's a nice upgrade from the old vent.

by: Bob T 04/01/2017

Items arrived fast with regular ground shipping. The roof vent was a perfect fit and installed as expectd. The price was awesome; it was half the price as the vent at my local RV dealer. etrailer.com wil be my go to for all my replacement parts.

by: Robert 02/01/2018

Excactly what I needed to replace the old vents in my trailer. The Free shipping is great.. It really makes a difference with whom I bought from. I spoke with a person on the phone before I ordered my products just to make sure it was everything I needed. she was courteous and thorough..It was her who suggested these butyl tape kits.. good job ! I will definitely be buying from etrailer again.

by: William 01/13/2018

Used this to hopefully stop and leaks on the awning rail.

William One Year Later

1/13/2019

It worked great but have since traded the trailer on something else

William One Year Later

1/14/2019

They worked fine but since then we traded that trailer in for something else. Thanks for asking Have a Great Day

by: Bob 06/03/2018 One Year Later

Worked great for the installation of the Mac air fan.

Bob One Year Later

6/3/2019

Still keeping the water out.

by: James 07/10/2022

It did the job for my camper vent install but the width was inconsistent. I ended up doing 2 side by side strips along the vent flange to ensure good coverage. In some place the width of this tape was so thin it didn’t cover the entire flange.

by: Thomas 02/08/2020

This was what needed. I live in a manufactured home I looked all over for this vent not even the builder of my home could help me. Thank you etrailer. You should let manufactured home owners know of your replacement Parts. Thanks Again tom michaels.

by: Umberto 02/16/2018 One Year Later

Still providing a seal to my slide topper bracket after one year, no discoloration noted..

by: Ryan 05/30/2022

Worked great on my slide out awning install. Just the right amount.

by: Thomas 05/06/2019

After watching installation video, the job went without a hitch.

by: Randy w 09/05/2018

This worked well with my fan install on the rubber roof of the 5th wheel. Simple and necessary.

by: Anthony 08/26/2018

Works great for sealing mounting bracket screws, its a must have.

by: David 05/18/2022

Good product at a good price. Easy to install. The box was damaged and the interior shroud was cracked. I was able to trim the damaged section off as it turned out to be excess to the installation process

155

true

Show More Reviews

See what our Experts say about this Camco Accessories and Parts

Do you have a question about this Accessories and Part?

How to Determine Which Trailer Roof Vent Cover will Fit a Trailer
In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco # CAM40154; or a rolled metal continuous hinge like on the Ventline # BVD0449-A03; and universal hinge as shown on...
view full answer...
RV Roof Vent Recommendations, One with Rain Sensor and One that is Manual Lift
Hey Charlie, the MaxxFan Plus Roof Vent w/ 12V Fan, Thermostat, and Remote # MA00-04500K is what I recommend for a roof vent that is quiet and has a rain sensor like you are looking for. Then for a manual lift roof vent the MaxxFan Roof Vent part # MA00A04301K would be a great option. Then for covers for both you could use the part # MA00-955001 which was designed to be used with MaxxFans like what you have. For a vent install kit that doesn't have the leveling caulk then we have the...
view full answer...
Remote Control Operation of MaxxAir MaxxFan Deluxe 12V Trailer Vent MA00-07500K
My contact at MaxxAir confirmed that if you install two of their MaxxFan Deluxe # MA00-07500K in your Sprinter you can use either remote control to operate both fans. The remotes are programmed the same so the one from one fan will still work the other fan too so long as there is a line-of-sight between the remote and the sensor on the vent. You do not have to program or pair the remote with the fans. This means you can use one remote and keep the other in a safe place as a spare. For...
view full answer...
Replacement Vent Covers for a 1969 Wilderness Camper Trailer
Most likely we have what you are looking for but you will need to first determine what vent you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco...
view full answer...
Replacement Vent Cover Recommendation for a Rockwood Signature Travel Trailer
Most likely we have what you are looking for but you will need to first determine what vent you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco...
view full answer...
Determining Correct Replacement Vent For Jensen 7000 Series Vent
Most likely we have what you are looking for but you will need to first determine what vent style you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on...
view full answer...
Picking Out Replacement Roof Vent Cover for 2010 Arctic Fox B1150
Most likely we have what you are looking for but you will need to first determine what vent you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco...
view full answer...
Do Slide Toppers From Solera Come with Caulking or Butyl Tape
The Solera Slide Toppers we have available, such as the 10.5' # LCV000168105 that you were looking at, do not include caulk like # 0160297 or butyl tape but it can be added with part # CAM25013. The Slide-Toppers include the awning itself, mounting hardware and brackets, and the awning rail. I have attached a short video demonstration on this product that you can also take a look at.
view full answer...
Roof Vent Install Kit for a 2006 Rockwood Rockwood Ultra Lite Series M-2304S with Rubber Coated Roof
The correct kit you need to install a roof vent on your 2006 Rockwood Rockwood Ultra Lite Series M-2304S with a rubber coated roof is part # CAM25013 as you mentioned. The reason for this is because the rubber coating and silicone may not be compatible with one another which could lead to an improper seal or break down of materials. You would need to scrape away the old material with a putty scraper before the butyl tape is used.
view full answer...
Is Wiring Included with Ventline Roof Vent with 110V Fan # V2128SP-01
The Ventline Roof Vent with 110V Fan # V2128SP-01 includes two pigtail wire leads and a wiring compartment for making the AC power connection to existing trailer wiring. No plugs or wiring harness are included but you can use butt connectors like # 05732-2. If you need an installation kit you can use part # 344270KITW which includes both mounting screws and sealant and that is suitable for trailer roofs made of metal or coated metal roof and wood (but not rubber). For a rubberized roof...
view full answer...
Replacement Roof Vent That Measures 13 X 13
You do not have to buy a new RV, from your photo it looks like you need Replacement cover part # CAM40153. Although the vent itself may be considered 14 x 14 some roof vents came with smaller covers. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point...
view full answer...
Installation of Replacement Lid for RV Vent with 3-Point Hinge
In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco # CAM40154; or a rolled metal continuous hinge like on the Ventline # BVD0449-A03; and universal hinge as shown on...
view full answer...
Replacement Roof Vent for Pace American Trailer
Most likely we have what you are looking for but you will need to first determine what vent you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco...
view full answer...
Recommended Butyl Tape For Installing Slide-Topper Awning
The Solera 14' Slider (Slide-Topper) in White w/ White Hardware # LCV000163301 comes with everything you need for installation except the # CAM25013 which is an 8 foot length that is shown in the video as you stated. I do recommend getting two of these for your installation for a nice seal. The hardware hole pattern of this awning is universal and will match most competitive brands which alleviates the need to patch holes.
view full answer...
Replacement Roof Vent Cover for a Keystone Cougar 327RES 5th Wheel
Most likely we have what you are looking for but you will need to first determine what vent you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco...
view full answer...
Recommendation for Adding a Complete Awning to an Enclosed Trailer
For your 28 foot enclosed trailer, I'll give you the recommendation for parts all in the color black, but other color options are available and easy to find once you have the list of parts needed. Let me know if you need help with colors or have any questions based on my recommendations. To start, I recommend the Solera 21' Solid Black RV Awning Roller and Fabric (Std) # LCV000211532. This will be the fabric and the roller bar and is the longest length we currently carry. To hold that...
view full answer...
Recommended Butyl Tape for MaxxAir MaxxFan Install
There is not a specific size of tape you will need to install a MaxxAir MaxxFan. I recommend using the RV Vent Installation Kit part # CAM25013 which comes with 8' long x 3/4" wide of white butyl tape that should be more than enough for your needs.
view full answer...
Replacement Hengs and Jensen Vent Cover with Pin Hinge
Most likely we have what you are looking for but you will need to first determine what vent style you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on...
view full answer...
Replacement Vent Cover for Wells Cargo RF85X244 Trailer
We don't really have any way of knowing exactly what vent and cover you've got on your Wells Cargo trailer, but we can help you find the appropriate replacement. Most likely we have what you are looking for but you will need to first determine what vent you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover,...
view full answer...
Replacement Bathroom Vent Cover for 2017 Lakota Horse Trailer
Most likely we have what you are looking for but you will need to first determine what vent you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco...
view full answer...
Bath Vent Cover for 2013 Winnebago Vista RV
I have a solution for you, but Winnebago and other RV/Trailer manufacturers are quite secretive about the specs on their OEM replacement parts, so unfortunately I'm not able to determine anything from the part number provided. Most RVs have a standard vent opening of 14-1/4" x 14-1/4" (with vent covers being 14"x14")- so replacement vent covers are fairly universal once you've determined that you have that sized opening. In order to determine the correct roof vent, measure where the vent...
view full answer...
Replacement Vent Lid for an Elixir Vent
Most likely we have what you are looking for but you will need to first determine what vent you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco...
view full answer...
Vent Cover Replacement for a Lark Utility Trailer Availability
Most likely we have what you are looking for but you will need to first determine what vent you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco...
view full answer...
Replacement Vent Cover Recommendation for a 1982 Avion Trailer
Most likely we have what you are looking for but you will need to first determine what vent you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco...
view full answer...

< Previous

12 3. . .8

Next >

Do you have a question about this Accessories and Part?

Info for this part was:

Expert Research:

Mike L

Expert Research:

Michael H

Expert Research:

Jameson C

Expert Research:

Adam R

Video by:

Andrew K

Written by:

Rachelle B

Updated by:

Wilson B

Test Fit:

Robert C

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.