Availability of Replacement Yates 343R Wobble Rollers

Question

Question:

I have a 1998 Karavan trailer withYates 343R rollers. Can you reccommend a replacement for these? Thanks,

asked by: David S

1

Helpful Expert Reply:

We have the Yates 343R wobble roller replacement you are looking for with the part # YR343R-6P which would work great for you.

expert reply by: Jameson C

1

David S.

6/25/2020

The response was exactly what I needed to know, perfect. Thanks, David

Answer 1

For a non-marking wobble roller to replace the ones you have now you'd need to go up to the 5 inch size like the part #YR500YW-8PEZ which has a 1 inch shaft diameter. I do not know specifically what shaft diameter you need so you'd need to…

view full answer...

Answer 2

You are correct. Wobble roller #YR343R-5P is indeed the 343R roller. But it has a diameter of 4-3/8 inches and a width of 3 inches. The roller fits a 5/8 inch diameter shaft or bolt. It is possible that over time your existing roller wore down some…

view full answer...

Answer 3

For your application I recommend checking out the Yates Ribbed Wobble Roller #YR343R-5P which fits a 5/8" shaft like what you mentioned but has a slightly larger 4-3/8" diameter. As long as you have room for another 3/16" of roller on…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

Hey Kim, thanks for reaching out. The Firestone Ride-Rite Air Bags with Easy Mount Compressor #F24XV do fit your 2020 Ram 2500 with rear coil springs, but the hang-up is the under-bed gooseneck hitch. On your truck, the air bag brackets and the…

view full answer...

Availability of Replacement Yates 343R Wobble Rollers

Product Page this Question was Asked From

Continue Researching