3" Wide wobble roller replaces 1 worn-out roller on your Load Rite boat trailer's roller bunk. Thermoplastic rubber outlasts traditional rubber and won't mark up your boat. Ribbing provides extra traction for slippery hulls.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Instructor Today we're gonna be taking a look at the Yates Ribbed Wobble Roller for load right boat trailers. That's going to replace one of your wobble or rocker rollers on the roller bunk assembly of your boat trailer. And like the name suggests this is designed for use on load, right boat trailers. Now the rib design here, you can kind of see it there from the side, these ridges, all along, that's going to give you some additional traction on the whole of your boat. So it's gonna be really helpful when you're pulling it up out of the water and the hole is maybe slick or slimy. It's going to give you that traction that you need to help get it up there.
It is designed and constructed of CPR or thermal plasticized rubber and material is going to be non-marking, non-scratching. It's gonna be a little bit stronger and more durable than traditional rubber, but also softer than polyurethane. So it's gonna be a really good material. It's gonna hold up really well. This is made in the USA and it has an inch and a quarter diameter shaft right here in the middle.
And then for our overall diameter here, we're gonna be sitting right at five inches. And for the width of our roller here, we're gonna be right at three inches and that'll do it for a look at the Yates Ribbed Wobble Roller for load right boat trailers..
Customer Satisfaction Score:
92% were satisfied with this product
8% of customers were not satisfied
Ratings & Reviews
You always have what I need!! My item was not in stock however one of the associates offered me an alternative which would have worked however I waited for the wheels that I wanted. They arrived a couple days early to my surprise and I’ll be able to get on the water sooner than I expected. Keep up the great works guys!!! I love this company.
We replaced all of the Wobble Rollers on our trailer. The yellow plastic doesn't mark up the bottom of the boat like the original black rubber ones did. The hub of the Yates rollers is a little longer that the original rollers so instead of one washer one each side, only a single washer would fit.
Prior to finding E-Trailer, had difficulty in finding Yates non-marking replacement rollers with 5/8" hub opening. The item was in stock (ordered 22). Service and delivery was timely. Great follow-up to confirm that order was received. The current version of the roller is slightly narrower at the hub opening than the units (8 years old) that were replaced. Adding an additional washer made up the space difference and the rollers work great. Thanks.
Someone stole four yellow rollers off of my triaxle boat trailer. I called your company and ordered 4 new rollers with all of the parts I need to install them. I already have received them and plan on installing them on the next warm day. You guys made it easy for me by helping with measurements and telling me everything I need to know about installation of the rollers. Thanks for all your help.
I got some before and after pics for you here of my 1988 EZ LOADER carrying a 1991 SeaRay 200-BR.
I got some before and after pics for you here of my 1988 EZ LOADER carrying a 1991 SeaRay 200-BR.
Trevor W at etrailer was a great help in selecting the correct product for my trailer. The quality and ease of installation updated the trailer to new condition.
Very nice rollers. Fit perfectly. Put on ez load needing 1 inch rollers and these did the job without using an extra bushing. Shipping was super fast. Very friendly staff to deal with.
Great follow up on orders. Parts were back ordered. etrailer sent updates almost daily reassuring me the parts were on the way. Would definitely order from etrailer again. Everything arrived.
Measured and ordered the parts to replace the rollers on my EZLoader trailer. Shipment showed up super fast and was able to get it done right the first time. There is a helpful video on you tube that shows how to install these rollers. My boat now glides on and off my trailer!
Thank you for the great service!
Great product it really modernizes my EZ loader trailer. I was able to replace my back ones with my boat on the trailer. The front rollers are 1 1/8” shaft with c-clips and the rear ones are 5/8” shaft. I
replaced the front washers 1 1/4” x 16 outers only and the rear rollers 32 of the 5/8” shaft with 64 new washers. I also found with the rear rollers I had to
Shave the plastic spacers about 1/8” Everything looks great. Takes 15 years off the trailer Great Product and would recommend to everyone wanting to update their trailer and not have to deal with those ugly black marks the old rollers can leave behind. Hope this is helpful.
This roller was an excellent replacement for the worn rubber rollers on my Shoreline Trailer. My 21' Chris Craft was difficult to get on and off the trailer because the old rollers were being crushed under the weight of the boat. After replacing the first 16 rollers my boat rolled easily on and off the rear section of the trailer. So needless to say I am ordering 16 more for the front section. The slightly larger diameter seems to help also. I am extremely pleased with this roller and highly recommend it for anyone experiencing similar issues. Also they look great.
Replaced the rollers on my Karavan trailer with 60 new Yates ribbed wobble rollers from etrailer, installation was easy and quick, roller wasn't Karavan brand but met the specs and works perfect. May be too early to say but based on what I see of these new rollers I expect them to last a long time .
Restored a trailer for a Sirius 22 sailboat. Given the age of the boat and original trailer, etrailer was the only place I could find the 1" diameter shaft wobble rollers. Trailer 1 year on and the wheels work great!
Exact replacement for my Magic Tilt trailer. Replaced all 16 rollers in under an hour.
These have been working well on my 24 roller tandem EZ Loader trailer.
I've never had a bad experience with etrailer. keep up the good work.
I am extremely pleased with the rollers I received from my load rate trailer actually was a perfect fit. I tried other rollers and they were the wrong product. I finally found you guys online. I’ll be an adamant customer if I need any more. Thank you very much
Do you have a question about this Boat Trailer Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.