Replacement Antenna for Furrion RV Backup Camera and Observation System

Question

Question:

I need an antenna for my Furrion RV back up camera. Part # C-FOS07TAPK-005. i understand it is a common antenna for all Furrion cameras.

asked by: Howard S

0

Expert Reply:

We have exactly the part you're looking for with the Replacement Antenna for Furrion Vision 1, 2, and S Wireless RV Camera Systems # 772577. This antenna works with Furrion systems # FCE48TASL-05, # FOS05TASF or # FOS43TASF.

expert reply by: Erik B

0

Answer 1

Hey Travis, We do have replacement arms for your Solera 2000 Series awning. We have both the drive arm and idler arm. The drive arm is the one that houses the motor, the idler is the other side. For the replacement drive arm you want to go with…

view full answer...

Answer 2

Thank you for the photos! I reached out to my contact at Lippert and they said your 5th wheel trailer is equipped with a model 1621 pin box so that's what you want with a Reese 5th Airborne: - 20K Reese 5th Airborne Premium Fifth Wheel Air Ride…

view full answer...

Answer 3

Hey Jay, we have the Commercial Grade Battery Box part #329-HM408 that you referenced which would fit your battery dimensions well. It's very easy to get into and will do a great job protecting your battery as well.

view full answer...

Answer 4

The Jensen LED Television #JE3217 is a great TV for your 2008 Winnebago Journey 39Z. It connects to a standard wall outlet, has TFT LED illumination (with a brightness of 200), and it features 3 HDMI inputs, a component video input, a USB input, and…

view full answer...

Answer 5

Hello Rich, thanks for reaching out. The best replacement for the Jensen Awm965 is the Jensen RV Stereo #JWM60A. It has the same cut out size as the Awm965 at 9" wide x 6" tall x 5-1/2" deep. The wiring connector for the Jensen RV…

view full answer...

Answer 6

Hey David, thanks for reaching out! I definitely have a solution for you, but it won't be an exact replacement for what you currently have. The Stromberg Carlson RV Exterior Ladder #LA-401 is the best replacement option because it's a…

view full answer...

Answer 7

Ken, so it does look like the Curt Flex Air 5th Wheel Pin Box #LC65VR will work as a replacement for your current pin box on your 2022 Grand Design Solitude 310. The Curt Flex Air is actually a bit longer than your pin box measuring 15 3/4" from…

view full answer...

Answer 8

That is a good question, Paul. I am surprised the usable length isn't listed for the Curt #C23025 locking hitch pin. I went out to our warehouse to measure one and it looks like it will fit without issues (I included a quick diagram below with…

view full answer...

Answer 9

The antenna should just twist on and off so if the broken one on your current system is stuck you can use pliers to get a bit of a better grip to assist in unscrewing it, which will allow you to install the Replacement Antenna for Furrion Vision S…

view full answer...

Answer 10

Yes, for the B&W Tow & Stow, I recommend the Trailer Hitch Receiver Lock for 2", 2-1/2", and 3" Hitches #C23025.

view full answer...

Answer 11

Yes you can replace the shank of the Curt weight distribution system part #C17499 with one that has more drop so that your trailer can be towed level. For that the Curt part #C17121 would give you a drop of up to 7 inches.

view full answer...

Answer 12

When the instruction manual for the Curt TruTrack Weight Distribution System part #C17499 states to set the bracket height closest to the spring bar position set with the jack earlier, they are referring to the when you raised the front of the…

view full answer...

Replacement Antenna for Furrion RV Backup Camera and Observation System

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching