Replacement Hubs for 1994 Shelby Haulin Trailer
Updated 08/16/2012 | Published 08/14/2012
Question:
I have a Haulin tilt style utility trailer model is a Shelbyinch #5133, it is pretty old. I bought used and just had the bearings blow out on one side. Upon inspecting the hub needs to be replaced and I figure I will do both as I am sure the other side is bad also. Cant seem to figure out a good replacement hub thats ready to go. Can you help? The 4 lug hub has a number stamped on the back: 8-91A also has A6inch stamped on it.
asked by: Paul
Expert Reply:
To find the correct hub for you, I will need to know the wheel bearing numbers or an accurate measurement of the spindle with a digital caliper. I will also need to know the bolt pattern of the hubs you are replacing.
The cages that the wheel bearings sit in should have a reference number stamped on the back of them (see diagram). I will also provide you a diagram showing where on the spindle the measurements need to be taken.
You will also want to make sure that your spindles are still in decent shape.
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Idler Hub
- Standard
- L44649 / L44649
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Search Results: trailer jack
- Search Results: trailer lights
- Search Results: power mountain tallboy
- Shop: Power Mountain Tallboy Off-Road Bottle Jack - 8-1/2" to 37-3/4" Lift - 6 Tons
- Shop: Kenda 5.70-8 Bias Trailer Tire with 8" Galvanized Wheel - 5 on 4-1/2 - Load Range B
- Shop: Kenda 5.70-8 Bias Trailer Tire with 8" Galvanized Wheel - 5 on 4-1/2 - Load Range D
- Shop: Loadstar 5.70-8 Bias Trailer Tire with 8" Galvanized Wheel - 5 on 4-1/2 - Load Range C
- Video: Review of etrailer Trailer Hubs and Drums - Galvanized Idler Hub - AKIHUB-545-35-G-K
- Search Results: lubrimatic marine grease
- Shop: Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: LubriMatic Marine Trailer Wheel Bearing Grease - 3 oz. Cartridges - Qty 3
- Q&A: Replacement Coupler for Shelby 5133
- Search Results: cotter pin
- Search Results: 5 on 4~1/2 inch trailer hubs and drums
- Search Results: hub assembly
- Shop: Trailer Hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Trailer Wiring Diagrams
- Video: A Look at the Power Mountain Tallboy 6 Ton Off-Road Bottle Jack with a Military Cargo Trailer
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Review of Power Mountain Automotive Tools - Jacks and Jack Stands - PM34FR
- Shop: Trailer Wiring
- Q&A: How Much Do the Power Mountain Tallboy Off-Road Bottle Jacks Weigh?
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: Suspension Enhancement
- Q&A: Does etrailer Carry Furrion Chill Cube w/ Heat Pump to Replace Dometic Duo-Therm
- Q&A: Best Suspension Upgrade for 33" Tandem Axles: Road Armor vs Dexter EZ Flex for Ember 22ETS
- Shop: Brake Controller
- Article: How to Measure for Trailer Hitch Drop
on Trailer Hubs and Drums
