Class IV Trailer Hitch Fit for 2020 Ford F-150 Without Factory Trailer Hitch Receiver

Question

Question:

I am looking for a class 4 hitch for a 2020 f150. The truck does not have a hitch I need the wire adapter for the 4 and 6 pin. The brake module Please break out

asked by: Marc R

0

Expert Reply:

There are several hitches to fit your 2020 Ford F-150 that does not have the factory hitch, the Curt # C14017 is the class IV.

It has base capacities of 10,000 lb towing and 1,000 lb tongue weight capacity, this increases to 12,000 lb towing and 1,200 lb tongue weight capacity when used in conjunction with weight distribution systems.

I have added a links to the video install of the # C14017 hitch for you to check out.

In regards to wiring adapter, I'm not quite sure what you are referring to, but if you do NOT have the factory tow package you can add a 7-way with the Curt T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector # C56413.

expert reply by: Kyle S

0

Answer 1

For your 2017 Ford F-150 we have the 7-way kit part #C56413 as a confirmed fit. This plugs into the trailer wiring connector that is present at the truck frame rail and gives you a functional 7-way. I attached an install video for this for you to…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Class IV Trailer Hitch Fit for 2020 Ford F-150 Without Factory Trailer Hitch Receiver

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching