Replacement Tarp for Extang EMax Tonneau Cover for 2014 GMC Sierra 1500

Question

Question:

I have an Emax tonneau cover an I am in need of a replacement tarp. The part number on the existing cover is 72445. The factory told me to go directly to you for this. Could you please help in ing the replacement part?

asked by: Patrick

1

Helpful Expert Reply:

The correct replacement tarp for your Extang EMax Tonneau Cover EX72445 can be found with part # EX44VR.

expert reply by: Erik B

1

Answer 1

The Replacement Tarp #EX92405-20 is for a Extang Trifecta 2.0 Soft Tonneau Cover #EX92405 that fits a 2009 - 2014 Ford F-150 5-1/2 Foot Bed. To properly identify the correct replacement cover you will need to locate the part number on the tonneau.…

view full answer...

Answer 2

I am happy to determine the replacement cover for you but I would need the serial number off of your older Extang cover. The easiest way is to locate the serial number. Most of the time the serial number can be found on the driver's side front…

view full answer...

Answer 3

Hi Randy; the correct replacement tarp for your old 72475 is the Replacement Tarp for Extang eMAX Soft Tonneau Cover #EX29VJ.

view full answer...

Answer 4

Yes, the correct replacement tarp you'd need is the #EX53FR for the eMax tonneau EX72450 that fits your 2018 Chevy Silverado 1500.

view full answer...

Answer 5

Hello Joe, Thanks for writing in! Based on the measurements you provided, the Gen-Y Glyder Shock Absorbing Ball Mount #325-GH-12001 is not the right fit for your setup. Since your Tundra's receiver measures 18 inches from the ground and your TAB…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Hey Dan. If you positioned the hitch ball attachment towards the top of the Curt Rebellion XD Ball Mount item #C83WR you'd be level, assuming the 18" measurement you gave me is the height of your trailer's coupler. There is not a shorter…

view full answer...

Answer 8

Hey Pam, welcome back! To replace your Pentair Shurflo Revolution 4008 Series By-Pass Pump, I recommend the Seaflo Diaphragm Pump for Boats and RVs item #SE57FR. This is a 12v powered three gallon per minute pump that is rated up to 55 psi. It works…

view full answer...

Answer 9

The Curt Rebellion XD Shock Absorbing Adjustable Ball Mount w/ 2" and 2-5/16" Balls #C83WR is 8" from the bottom of the receiver shank to the bottom of the adjustable mount.

view full answer...

Answer 10

Hey Maury! The Westin HDX Winch Mount Modular Grille Guard item #W88EC weighs 110 lbs including the mounting hardware and brackets. This grille guard is confirmed to fit the 2016 Toyota Tundra. Why are you adding a grille guard to your Tundra?

view full answer...

Replacement Tarp for Extang EMax Tonneau Cover for 2014 GMC Sierra 1500

Continue Researching