Locating Tarp Part Number On Extang Tonneau Covers

Question

Question:

2016 Chevy Colorado LT Will this product fit my truck it’s a 6 foot bed

asked by: Del G

0

Expert Reply:

The Replacement Tarp # EX92405-20 is for a Extang Trifecta 2.0 Soft Tonneau Cover # EX92405 that fits a 2009 - 2014 Ford F-150 5-1/2 Foot Bed.

To properly identify the correct replacement cover you will need to locate the part number on the tonneau. The part number is typically 10-11 digits, stamped along the underside of the cover, typically located at the driver side cab corner. Once you have this number let me know and I will confirm the correct replacement tarp for your 2016 Chevrolet Colorado.

expert reply by: Bud M

0

Dan V.

10/17/2025

is the part number stamped into the steel or on the tarp is there any other visual ways i can tell if its the original or a 2.0

Kate F.

10/20/2025

@DanV Hey Dan, you can usually find it stamped on the metal frame, or on a sewn label on the tarp (2.0). Sometimes it can even be found on the roller tube or end cap sticker. It is a fun little game of hide and seek.

Answer 1

The SumoSprings Solo Custom Helper Springs part #SSR-108-47 which are a fit for a 2003 Ford F-150 4x2 are designed to have a gap between the axle and spring of around 1-1/2" while unloaded. If you have a greater distance then there's…

view full answer...

Answer 2

The SumoSprings #SSR-108-47 that fit your 2-wheel drive 2003 Ford F-150 are a great choice. They'll help keep your truck level when you have the added weight of the boat or sand without causing a rough ride the rest of the time. They're also…

view full answer...

Answer 3

The maximum payload capacity for your 2005 Ford F-150 can be found on the tire label on the b-pillar or the edge of the driver’s door. Look for “THE COMBINED WEIGHT OF OCCUPANTS AND CARGO SHOULD NEVER EXCEED XXX kg OR XXX lb.” as this will be you…

view full answer...

Answer 4

We do have a 1" spacer for the SumoSprings Solo Custom Helper Springs, part #SSR-108-40. It's the Timbren 1" Spacer For Raised Frame Vehicles, part #A25723-90AH00. You can add these on top of the one that comes with Helper Springs to…

view full answer...

Answer 5

The correct replacement tarp for your Extang EMax Tonneau Cover EX72445 can be found with part #EX44VR.

view full answer...

Answer 6

I am happy to determine the replacement cover for you but I would need the serial number off of your older Extang cover. The easiest way is to locate the serial number. Most of the time the serial number can be found on the driver's side front…

view full answer...

Answer 7

Yes, the correct replacement tarp you'd need is the #EX53FR for the eMax tonneau EX72450 that fits your 2018 Chevy Silverado 1500.

view full answer...

Answer 8

Hi Randy; the correct replacement tarp for your old 72475 is the Replacement Tarp for Extang eMAX Soft Tonneau Cover #EX29VJ.

view full answer...

Answer 9

There are a couple things that you can do that will help with the sway and bounce on your trailer when you are pulling it with your vehicle. The first thing you can try to do is tow the trailer level. If the tongue on the trailer is high, then the…

view full answer...

Answer 10

Hi Ronald; I'm sorry to say that a replacement tarp is not available for your eMAX. I just confirmed this with Extang. The tarp you were looking at would have been correct since the 72450 is the cover you have now. However, these ship directly…

view full answer...

Answer 11

Hey Gregory, for the Extang BlackMax tonneau you have on your 2014 Chevy Silverado 1500 6.5 foot bed the correct replacement tarp is the part #EX1770.

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Locating Tarp Part Number On Extang Tonneau Covers

Products Featured in This Question

Continue Researching