What Size Tap to Clean Out Threads for etrailer Hitch that Fits 2006 Toyota Tacoma

Question

Question:

what is the bolt size and thread for e98850 for Toyota Tacoma? will need to tap since it is very rusted.

asked by: John

0

Expert Reply:

The hitch part # e98850 that you referenced uses a bolt in the size M12 x 1.25. You will need an M12 X 1.25 thread tap.

expert reply by: Jameson C

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Hey Mark, for your 2014 Toyota Tacoma the hitch I would recommend is the etrailer part #e98850 which has great towing capacities and is mostly hidden. Then for trailer wiring the Tekonsha kit part #118496 is the easiest to install and most reliable…

view full answer...

Answer 3

The 5,000 lb tow weight rating is definitely enough to safely tow a car trailer weighing in at 4,600 lbs total. The only time I would be nervous about the weight difference is if it was under 100 lbs in your situation. According to my research the…

view full answer...

Answer 4

The only compatible Draw-Tite trailer hitch receiver for a 2008 Toyota Tacoma is the Draw-Tite Max-Frame Trailer Hitch Receiver #75236, which excludes X-Runner models. If you have a regular Tacoma then you'd be fine using that hitch. If you do…

view full answer...

Answer 5

The etrailer Hitch item #e98850 you were looking at, is custom fit so the holes will line up on your 2014 Toyota Tacoma if you do not have a factory hitch installed. This hitch does include all of the necessary mounting hardware to complete the…

view full answer...

Answer 6

When we have customers tell us that their trailer lights only work when the vehicle's headlights are off then this is usually a ground issue. Did you check both the trailer side and vehicle side connector? If not I would do this first and also,…

view full answer...

Answer 7

It sounds like you are trying to add a 4-way trailer wiring connector at the back of your 2015 Toyota Tacoma that connects behind the tail lights. For that we have the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector…

view full answer...

Answer 8

When it comes to installing a towing package on your 2012 Toyota Tacoma there are a few things you will need. The etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2 inch #e98850, has a bolt on installation with no…

view full answer...

Answer 9

A trailer hitch like the etrailer #e98850 is a Class III hitch (hitches are given a class based on their weight capacity and receiver size) and will attach to the frame of your 2014 Toyota Tacoma, so it will provide a secure connection to your…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 12

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

What Size Tap to Clean Out Threads for etrailer Hitch that Fits 2006 Toyota Tacoma

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching