bing tracking image
Q & A Icon

How to Determine if Lippert Ground Control 3.0 Will Fit 5th Wheel RV  

Updated 04/24/2020 | Published 04/23/2020

Question:

Would the lippert Ground Control 3.0 work and fit on a 2015 Grand Design 303RLS 5th wheel rv ?

1

Helpful Expert Reply:

Great question! The Lippert Ground Control 3.0 4-Point # LC358590 and 6-Point # LC675817 systems are universal but there are some general guidelines to look at to ensure that they will work with an RV like your 2015 Grand Design 303RLS:

Weight Capacity - Can't exceed 15,500 lbs GVWR (your 303RLS is les than this)
Rear Jack Locations - These need to be about 1' behind the rear axle hanger and they require 7" of ground clearance to be able to operate appropriately. This normally isn't an issue but we have run into it due to how the RV was setup. I'm attaching a dimensional photo of the rear jack for you to check out. From the ground to the bottom mounting hole is about 7" so you can use this as a guide.

I'm attaching some other photos for you to check out in determining what the correct setup is for you. Ultimately I don't think you'll have any problems installing this system on your Grand Design, but since we did run into that rear jack problem on a different RV I wanted to make sure you are able to look at everything on your end.

expert reply by:
1
Jon G
click to enlarge
click to enlarge
click to enlarge

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>